Author |
Message |
Rogue_biker
| Posted on Sunday, December 15, 2013 - 09:35 pm: |
|
Who makes this lower fairing for the RMR Geico racing 1125R?
|
D_adams
| Posted on Sunday, December 15, 2013 - 09:51 pm: |
|
Looks like flexi-glass to me. |
99buellx1
| Posted on Monday, December 16, 2013 - 12:39 pm: |
|
Yep. |
Shawns
| Posted on Monday, December 16, 2013 - 04:55 pm: |
|
True story fella |
Jdugger
| Posted on Monday, December 16, 2013 - 05:50 pm: |
|
It's the older version, too. IMHO, you don't want this bodywork, you want the newer flexi-glass bodywork. I've got the V1 bodywork pictured here, and I just ordered the V2. The V2 is dramatically more narrow, and looks better, IMHO! This version protrudes enough you will end up dragging it on the pavement a lot in corners. |
Stirz007
| Posted on Tuesday, December 17, 2013 - 02:12 pm: |
|
Yep to all of the above. The stuff on the website is the "Gen I". The Gen II stuff is what Trevor sells now - not great shots, but a smaller radiator outlet opening.
|
Jdugger
| Posted on Tuesday, December 17, 2013 - 02:37 pm: |
|
... and you don't do this: which causes this:
|
Shawns
| Posted on Tuesday, December 17, 2013 - 04:59 pm: |
|
Trevor has 2 different versions, one is a little cheaper than the other. They look about the same, I have a set I am waiting to install time permitting/ |
Stirz007
| Posted on Tuesday, December 17, 2013 - 06:33 pm: |
|
Shawn - Ram Air (previous photos are all Ram Air) is the spendier set-up, but it doesn't provide for fans. Unless you're track-only, get the non-Ram Air. Non-Ram requires re-use of ducts and factory inners. Non-Ram air:
|
Shawns
| Posted on Tuesday, December 17, 2013 - 06:37 pm: |
|
True story.. Can't wait to get mine on and cerakote them. |
Lospice1
| Posted on Monday, December 23, 2013 - 12:59 am: |
|
Jim...You're about to rub your brake line Glad you fixed it! w |
Jdugger
| Posted on Monday, December 23, 2013 - 09:58 am: |
|
The dry break is a bit spendy, but uber-trick and makes wheel changes easier... A LOT easier. |
Stirz007
| Posted on Monday, December 23, 2013 - 07:11 pm: |
|
The Non-Ram lowers and belly are available (including blue painter's tape over dzus) if someone needs them. My garage is really getting out of control and I need to get rid of some stuff. (Message edited by Stirz007 on December 23, 2013) |
Lospice1
| Posted on Monday, December 23, 2013 - 07:28 pm: |
|
i'll buy them! pm me! thanks, will |
Skntpig
| Posted on Sunday, December 29, 2013 - 09:14 am: |
|
PM sent regarding bodywork availability. |
Nobuell
| Posted on Friday, January 10, 2014 - 02:54 pm: |
|
Just purchased the used bodywork shown below plus a new belly pan and tail for the track bike. I have been working with Trev at Flexi Glass. Great guy to work with.
Looks like I will be flying the Maple Leaf this season. Eh! |