| Author | Message | ||
     Jdugger |
Responded to PMs regarding the subframe, pegs, and swingarm. Shipping/packing is going to be expensive on the large/heavy items. We need more Texans  | ||
| Jdugger |
Updated list: $25 '08 Rear Set bodies, no pegs. These have a lot of "love" on them. $20 Stock Pegs, showing lots and lots of love. $100 09 Rear Sets, idler wheel, stock pegs Complete, relatively new. $100 Quantity 4 brake levers, 2 are new, 2 are scuffed or bent slightly, all usable, quantity 1 clutch lever, minor damage, would prefer to sell whole lot as a set of spares. (this is a smokin' deal) $50 Set of sliver XB levers OEM, $10 ea used quan 2, blinker side control switch module $0 pick up only 2 horns $50 70 T belt pulley $50 ea Quan 2 Belt front pulley/compensating sprocket $500 Relatively New set F&R black wheels, oem rotor bolts and rotor, has a few track days on it, but good condition overall. Would clean up very nicely. Front and rear wheels together, bolt on ready to go and use, has all parts $400 Set of diamond blue wheels, has EBR rotor and mount kit on it, front and rear wheels, has an unbelievable amount of love on them. Will look decently good cleaned up, but these are definitely a good choice for a 2nd set of track wheels. READY TO GO -- nothing missing. $100 *New* Belt for 1125r. $50 ea Two full clutch baskets, springs, bits, etc. $0 (pickup only) 2 Stock rear rotors, 4 used front rotors, fronts are take offs and are done for track duty, would be OK on street but not great $50 1125r full subframe $200 1125r stock exhaust $100 09 stock ecm $50 crashed but totally servicable stator side cover -- would be perfect as a spare under EBR case slider wouldn't even see the damage $100 '09 clutch side water pump engine cover with water pump and a blown water seal. If you cracked an engine case, this would be ideal, but it needs new water pump seal, otherwise in good condition. Relatively new. $75 OEM rear shock, modest use $25 ea quan 2 kick stands with non-sucky spring Clutch OEM master cyl. $50, $20 gas cap w/ 3 keys $150 OEM ZTL Caliper, good condition. I will split, clean and rebuild with fresh seals for $225 each delivered. $0 noid, pickup only. '09 swing arm, with axle, about 2000 track miles on it $50 | ||
| Wi_dale |
Photos of diamond blue wheels? | ||
| Jdugger |
I'll try and take some this weekend. Imagine 08 wheels after eons of track use. They are not cosmetically perfect, but all things considered, not that bad, either. Would be a very nice set of second wheels for someone doing track days or racing a stock machine. | ||
| Northernyankee |
Jim you have a PM about the swingarm. | ||
| Jdugger |
Responded... problem is going to be shipping something that large and heavy. | ||
| Jdugger |
Guys that I've shipped to so far: Can you confirm everything got there OK? Dean & Robert, your stuff goes out on Monday. | ||
| B2tomtom |
I'll let you know as soon as it shows up. | ||
| B2tomtom |
Got the belt today. Thanks! | ||
| Jdugger |
Some pictures of the wheels. I didn't have the blue front with me, so no picture of that. They were sprayed down with wheel cleaner, so still a little bit wet after the rinse...   | ||
| Jdugger |
Updated list: $25 '08 Rear Set bodies, no pegs. These have a lot of "love" on them includes Stock Pegs, showing lots and lots of love. $100 09 Rear Sets, idler wheel, stock pegs Complete, relatively new. $100 Quantity 4 brake levers, 2 are new, 2 are scuffed or bent slightly, all usable, quantity 1 clutch lever, minor damage, would prefer to sell whole lot as a set of spares. (this is a smokin' deal) $50 Set of sliver XB levers OEM, $10 ea used quan 2, blinker side control switch module $0 pick up only 2 horns $50 70 T belt pulley $50 ea Quan 3 (!?!?! how did I get all of these?!) Belt front pulley/compensating sprocket $500 Relatively New set F&R black wheels, oem rotor bolts and rotor, has a few track days on it, but good condition overall. Would clean up very nicely. Front and rear wheels together, bolt on ready to go and use, has all parts $400 Set of diamond blue wheels, has EBR rotor and mount kit on it, front and rear wheels, has an unbelievable amount of love on them. Will look decently good cleaned up, but these are definitely a good choice for a 2nd set of track wheels. READY TO GO -- nothing missing. $100 *New* Belt for 1125r. $50 ea Two full clutch baskets, springs, bits, etc. $0 (pickup only) 2 Stock rear rotors, 4 used front rotors, fronts are take offs and are done for track duty, would be OK on street but not great $50 1125r full subframe $200 1125r stock exhaust $100 09 stock ecm $50 crashed but totally servicable stator side cover -- would be perfect as a spare under EBR case slider wouldn't even see the damage $50 '09 clutch side water pump engine cover with water pump and a blown water seal. If you cracked an engine case, this would be ideal, but it needs new water pump seal, otherwise in good condition. Relatively new. $75 OEM rear shock, modest use $25 ea quan 2 kick stands with non-sucky spring Brake and Clutch OEM master cyl. The Clutch is in good condition. The Brake badly needs a rebuild ($15 kit from American Sport Bike) and has an aluminum bar mount that's not stock $50 for the pair. $20 gas cap w/ 3 keys $0 noid, pickup only. '09 swing arm, with axle, about 2000 track miles on it $50 | ||
| Pgh_biker |
Sent you a PM for the Belt | ||
| Jdugger |
got it-- replied | ||
| Jdugger |
Update Again: $25 '08 Rear Set bodies, no pegs. These have a lot of "love" on them includes Stock Pegs, showing lots and lots of love. $100 09 Rear Sets, idler wheel, stock pegs Complete, relatively new. $100 Quantity 4 brake levers, 2 are new, 2 are scuffed or bent slightly, all usable, quantity 1 clutch lever, minor damage, would prefer to sell whole lot as a set of spares. (this is a smokin' deal) $50 Set of sliver XB levers OEM, $10 ea used quan 2, blinker side control switch module $0 pick up only 2 horns $50 70 T belt pulley (1125r rear sprocket/pulley) $50 ea Quan 3 (!?!?! how did I get all of these?!) Belt front pulley/compensating sprocket $500 Relatively New set F&R black wheels, oem rotor bolts and rotor, has a few track days on it, but good condition overall. Would clean up very nicely. Front and rear wheels together, bolt on ready to go and use, has all parts $400 Set of diamond blue wheels, has EBR rotor and mount kit on it, front and rear wheels, has an unbelievable amount of love on them. Will look decently good cleaned up, but these are definitely a good choice for a 2nd set of track wheels. READY TO GO -- nothing missing. $50 ea Two full clutch baskets, springs, bits, etc. $0 (pickup only) 2 Stock rear rotors, 4 used front rotors, fronts are take offs and are done for track duty, would be OK on street but not great $50 1125r full subframe $200 1125r stock exhaust $100 09 stock ecm $50 crashed but totally servicable stator side cover -- would be perfect as a spare under EBR case slider wouldn't even see the damage $50 '09 clutch side water pump engine cover with water pump and a blown water seal. If you cracked an engine case, this would be ideal, but it needs new water pump seal, otherwise in good condition. Relatively new. $75 OEM rear shock, modest use $25 kick stand $25 Clutch OEM master cyl, no lever. $20 gas cap w/ 3 keys $0 noid, pickup only. '09 swing arm, with axle, about 2000 track miles on it $50 | ||
| Pmjolly |
I'm going to make a clock for my shop out of my old water pump engine cover. Haha. | ||
| Websii |
Great stuff, and better than described quality!! Thanks Jim! | ||
| Jdugger |
> I'm going to make a clock for my shop out of my old water pump engine cover What a great idea. Can you make one out of mine? | ||
| Zac4mac |
Jim Just received the parts. Levers look great and thanks for the extras with the switch. Enjoy your warm weather. It's 43 here, weather guessers said the high will be 39. I love bonus degrees. Z | ||
| Pmjolly |
Jim, as soon as I figure out how I'm going to do it, I'm sure I can make a nice shop clock out of yours, too. | ||
| Jdugger |
All of the above, PLUS: * Relatively new tail section, black, good condition $100 * Relatively new right side pod, good condition, $50 * Relatively new front fairing + headlight kit. Headlight kit has minor damage (epoxy leaked through form) on one light. $75. | ||
| Jdugger |
Update (some better prices, too!): * Relatively new tail section, black, good condition $100 * Relatively new right side pod, good condition, $50 * Relatively new front fairing + headlight kit. Headlight kit has minor damage (epoxy leaked through form) on one light. $75. $25 '08 Rear Set bodies, no pegs. These have a lot of "love" on them includes Stock Pegs, showing lots and lots of love. $100 09 Rear Sets, idler wheel, stock pegs Complete, relatively new. $100 Quantity 4 brake levers, 2 are new, 2 are scuffed or bent slightly, all usable, quantity 1 clutch lever, minor damage, would prefer to sell whole lot as a set of spares. (this is a smokin' deal) $25 Set of sliver XB levers OEM, used good condition. $10 ea used quan 2, blinker side control switch module $0 pick up only 2 horns $50 70 T belt pulley (1125r rear sprocket/pulley) $25 ea Quan 3 (!?!?! how did I get all of these?!) Belt front pulley/compensating sprocket $400 Set of diamond blue wheels, has EBR rotor and mount kit on it, front and rear wheels, has a lot of love on them, but are mechanically perfect. Pics on ebay. Will look decently good cleaned up, but these are definitely a good choice for a 2nd set of track wheels. READY TO GO -- nothing missing. $50 for Two full clutch baskets, springs, bits, etc. $0 (pickup only) 2 Stock rear rotors, 4 used front rotors, fronts are take offs and are done for track duty, would be OK on street but not great $200 1125r stock exhaust $100 09 stock ecm $25 crashed but totally servicable stator side cover -- would be perfect as a spare under EBR case slider wouldn't even see the damage $50 '09 clutch side water pump engine cover with water pump and a blown water seal. If you cracked an engine case, this would be ideal, but it needs new water pump seal, otherwise in good condition. Relatively new. $75 OEM rear shock, modest use $25 Clutch OEM master cyl, no lever, low use, good condition. $20 gas cap w/ 3 keys $0 noid, pickup only. '09 swing arm, with axle, about 2000 track miles on it. Good condition, mechanically perfect. $50 | ||
| Jdugger |
'09 Stock Forks (l&r) with about 1,500 miles on them. Obviously really good condition. $500 for the set. | ||
| Skntpig |
Would you consider selling the front blue wheel? | ||
| Jdugger |
I think I have the wheels sold. | ||
| Zac4mac |
Hey Jim - Any chance you still have the gas cap that matches(key) the switch and "trunk" latch you sold me? Would be nice to have a full set... Maybe it's time to get a keyless cap. Z | ||
| Jdugger |
It would be impossible for me to know since you have the keys now I do have a gas cap with three keys, and one with one key though... There's a 33.3% chance one of those fits with your stuff. Keyless cap FTW IMHO. | ||
| Jdugger |
Updated list: Bodywork: * Relatively new tail section, black, good condition $100 * Relatively new right side pod, good condition, $50 * Relatively new front fairing + headlight kit. Headlight kit has minor damage (epoxy leaked through form) on one light. $75. Chassis and Powertrain: * $500 Relatively new Forks, Left and Right. Great condition. About 1500 miles on them. * $25 '08 Rear Set bodies, no pegs. These have a lot of "love" on them includes Stock Pegs, showing lots and lots of love. * $50 70 T belt pulley (1125r rear sprocket/pulley) * $25 ea Quan 2 (!?!?! how did I get all of these?!) Belt front pulley/compensating sprocket * $50 for Two full clutch baskets, springs, bits, etc. * $200 1125r stock exhaust * $100 09 stock ecm * $75 OEM rear shock, modest use * $25 Clutch OEM master cyl, no lever, low use, good condition. * $20 gas cap w/ 3 keys * '09 swing arm, with axle, about 2000 track miles on it. Good condition, mechanically perfect. $50 Controls: * $100 Quantity 4 brake levers, 2 are new, 2 are scuffed or bent slightly, all usable, quantity 1 clutch lever, minor damage, would prefer to sell whole lot as a set of spares. (this is a smokin' deal) * $25 Set of sliver XB levers OEM, used good condition. * $10 ea used quan 2, blinker side control switch module Free to a good home, Pickup Only: * 2 horns * 2 Stock rear rotors, 4 used front rotors, fronts are take offs and are done for track duty, would be OK on street but not great * noid, pickup only. Crash Parts: * $25 crashed but totally servicable stator side cover -- would be perfect as a spare under EBR case slider wouldn't even see the damage * $50 '09 clutch side water pump engine cover with water pump and a blown water seal. If you cracked an engine case, this would be ideal, but it needs new water pump seal, otherwise in good condition. Relatively new. (Message edited by jdugger on November 21, 2013) | ||
| Wolfo68 |
How many teeth are on the front pulley? | ||
| Jdugger |
> How many teeth are on the front pulley? Not sure, but to my knowledge they are the same for both R and CR. | ||
| Dwp138 |
I got the kickstand Saturday. Thanks! |
