| Author | Message | ||
     Clutchreaper |
I want to get the Flexiglass side fairings and belly pan for my CR. Do these come with a cutout for the side stand? If not, will they be able to hold up if I make the cutout myself? This is not for a track bike so I'm not concerned about about this being within track regulations. This is more for aesthetic purposes. Advice and suggestions are welcome. | ||
| Clutchreaper |
Flexiglass it should say in the title. Smart phones are not so smart  | ||
| D_adams |
No, it's probably not pre-cut.  | ||
| Zecca |
who wants side stands? Haha | ||
| Clutchreaper |
Thanks for the picture Dean. Looks like it won't be too hard to make a template and cut it out. This should clear an RT-3, right? Thinking about ordering one with a quiet core. | ||
| D_adams |
RT-3 installed.   | ||
| Dhays1775 |
i was able to pick up a set of flexiglass fairings for my cr also. i'm doing a lot of modifications to make it how i want it. absolutely must cut to use the side stand. i also had to cut the end of the belly pan off because i'm using a stock type muffler. after i get everything shaped how i want, i'm gonna toss a layer of carbon fiber over it. got big plans. gonna be cool! sorry, didn't mean to hijack. | ||
| Clutchreaper |
No prob man. Cutting it shouldn't be a big deal, and I think the CR looks badass with side fairings. Can't wait to get this project underway! |
