G oog le Buell 1125R Forum | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Sportster_mann Posted on Sunday, November 27, 2011 - 02:43 pm:        I have just acquired a 6mm brake disc and fitting kit and have a question - which way round does it fit ? There is no dot on it to match up to the tyre valve and the "tabs" where the disc bolts up to the wheel are recessed on one side - do these recesses go to the outside or inside edge ? The instructions for the fitting kit implies that the recesses go to the outside edge so they are visible when fitted - but I just want to be sure.   Jdugger Posted on Sunday, November 27, 2011 - 05:18 pm:        Recess to the outside, and the rotor doesn't have a balance point, so any match up of tabs to mount points will do.   Sportster_mann Posted on Monday, November 28, 2011 - 09:11 am:        Thanks ! Luckily, just as I thought ...   Jdugger Posted on Monday, November 28, 2011 - 09:17 am:        The EBR rotors are a nice upgrade over stock. So is the mounting hardware. If you have pulsing issues, do you have a DTI to measure run-out on the wheel?

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a public posting area. Enter your username and password if you have an account. Otherwise, enter your full name as your username and leave the password blank. Your e-mail address is optional. Password: E-mail: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: