| Author | Message | ||
     Albert666 |
i have just finished this for a customer. pipe sizes are to their spec. pipework is 0.7mm inconel and the bends cost me a fortune, each bend is rolled from sheet, seam welded then bent, same material as f1 car headers the whole thing weighs 11.5 lbs most of which is packing material. bear in mind i have one garage 10ftx 5ft with two bikes in where i assembled it all, then have to go down the garden to my 15ftx8ft shed to weld it all up, plus taking my own bike apart to mock it all up on    (Message edited by albert666 on October 30, 2011) | ||
| Mountainstorm |
I am curious as can be about how that large chamber/diameter effects power output. | ||
| Ridenusa4l |
beautiful work! ....id be scared to think how much that thing runs $$$$$$$$$$$$$$$$$$$$$ now we need a dyno run!  Jake | ||
| Albert666 |
each bend was on average $53 dyno time will be down to the owner | ||
| Zac4mac |
Is that for an 1125 or an 1190? | ||
| Dannybuell |
Nice stuff. learned what inconel is, never heard of it. THX. http://en.wikipedia.org/wiki/Inconel | ||
| Ridenusa4l |
Zac- i guess it could possibly be for both, but from what i can see its all 1125 Jake | ||
| Avalaugh |
You need to show some close ups of your welds Albert666, your work really is art | ||
| Reepicheep |
Tig welded? | ||
| 99buellx1 |
Front header would not work with the 1190 radiator setup. | ||
| Smit3833 |
Sound clips? | ||
| Albert666 |
all tig welded and purged no sound clips, i just built it then took it off ready for shipping | ||
| Thefleshrocket |
Looks really nice. I take it the owner isn't a Badwebber? (if not, send him our way so he can show off that exhaust) | ||
| Father_of_an_era |
Sweet! I have the KEDA RT2 (which I absolutely love) but I would say that based off the look of these pics, KEDA has some competition. Nice looking work! | ||
| Albert666 |
father_of_of_an_era i do sponsor this site if you haven't seen my other work www.aph-performance-engineering.com just me in my shed after work | ||
| Believer |
Do you have any picture of reverso on 1125cr, and what is the price for it. Any gains with that exhaust? Thanks | ||
| Albert666 |
i did this one last year  think it was 136bhp at the wheel $650 inc delivery | ||
| Believer |
Nice, is there any problems when leaning low in turns? | ||
| Albert666 |
not that i know of, i try to keep the tailpipe so it exits no lower than the round part of the silencer | ||
| Believer |
I didn't want to open a new treat, so I'm posting here, since the exhaust is Albert's work. IT's not installed yet on my bike, since I'm probably buying it in january or february. So anyway, here is what my CR would look like...  - I already have XB tail - I already have hypercharger on airbox - I already have XB chin spoiler (I'm looking new one to put it on my XB :-) ) - I just need some new mirrors and exhaust Does anybody have some experience with that reverso exhaust? | ||
| Nillaice |
is that hypercharger gonna help or hurt your performance? it looks cool, but the airbox is designed to work with teh snorkel and ram air. just saying ... YMMV how are you gonna mount the XB chin? i kinda like it .... looks like you've got your work cut out for the winter. be sure to start a build-thread and post up lots of pics! | ||
| Hybridmomentspass |
killer looking exhaust albert!! that looks great! | ||
| Wkd1 |
i have the Alberts reverso on my bike, and he will be making some larger headers over the winter break for me. [IMG]http://i129.photobucket.com/albums/p223/wkd1_photos/bike%20stuff/painted%20bike/DSC02284.jpg[/IMG] mail me if you have any particular questions. Wkd1 (Message edited by wkd1 on November 10, 2011) (Message edited by wkd1 on November 10, 2011) | ||
| Methyman |
 |
