G oog le Buell 1125R Forum | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Shags Posted on Monday, November 09, 2009 - 09:02 pm:        I am putting higher bars on my 1125cr.I was disconnecting the fuel line from the rail and busted one of the little plastic clips off the connector.I was wondering if i have to replace the fuel line or can i just get a new plastic end piece.Does any one have any other ideas that can help.thanks for the help   Dmhines Posted on Monday, November 09, 2009 - 09:07 pm:        Ummm .. just curious ... why you were removing the fuel line? I just installed my High Bars and didn't touch the fuel line? I'm sure one of he guys on the board can give you the part # for it ...   Shags Posted on Monday, November 09, 2009 - 09:34 pm:        The instructions that came with the kit said to do so.That enables you to remove the lower part of the air box to access the throttle cables to change out for the longer ones.   Zac4mac Posted on Tuesday, November 10, 2009 - 04:14 am:        P0268.1AMB, fuel rail, all one piece. MSRP ~71 bucks. Be careful when you take things apart. Zack   Moosestang Posted on Tuesday, November 10, 2009 - 04:24 am:        The instructions that came with the kit said to do so.That enables you to remove the lower part of the air box to access the throttle cables to change out for the longer ones. You only need to unhook it from the bottom of the airbox. You don't need to disconnect it.   Shags Posted on Tuesday, November 10, 2009 - 08:16 am:        I am sorry if i didn't ex plane it very well.I didn't brake the fuel rail i broke the plastic tab that holds the fuel line to the rail.Do i have to replace the fuel line or can i just replace the hard plastic piece that connects to the rail.   Zac4mac Posted on Tuesday, November 10, 2009 - 08:47 am:        You were clear. The fuel rail is one part number, it doesn't break down. You should be OK at least for a while as long as the rail doesn't leak. Zack   Dmhines Posted on Tuesday, November 10, 2009 - 08:49 am:        All you were supposed to do was unhook the square head bolt from the groove in the air box .. at least that is all I had to do.   Shags Posted on Tuesday, November 10, 2009 - 09:37 pm:        Thanks for all the help B.W. is great!

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a public posting area. Enter your username and password if you have an account. Otherwise, enter your full name as your username and leave the password blank. Your e-mail address is optional. Password: E-mail: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: