| Author | Message | ||
     Mrbuell |
I have used the search feature (what a joke) I can not find anything on changing the rear tire, rear wheel, tires for an 1125r. Just trying to lear how to support a big without spools, Any thoughts on spools that actually allow a person to change the rear tire??? | ||
| D_adams |
 Something like that? I fabricated mine, then bolted them on. Easy enough to do, just need a way to strap the front end down the first time so it won't fall over on you. | ||
| Bcrawf68 |
I used jack stands from my car. Just placed them under each of the passenger pegs. Used a rag to keep the jack's feet from scuffing the peg mounts. | ||
| Orman1649 |
I used a set of jack stands and a cherry picker | ||
| Ccryder |
I used a T-Rex stand under the swingarm. I ended up using some epoxy to glue a 1" long x .25" square piece of "key-stock" on the bottom of the swingarm. This keeps the swingarm from sliding on the stand. There is a boss on the bottom of the swingarm. I glued them to that boss. | ||
| Cutlass |
i like the fender eliminator you have, did you make that or buy the pieces and put it on if so how about some part number's please......... | ||
| Mmcustoms |
Pit bull make a 1125r stand just for 1125 swing arm | ||
| Froggy |
Really? http://www.badweatherbikers.com/buell/messages/290 431/337516.html http://www.badweatherbikers.com/buell/messages/290 431/488463.html Then about a stand: http://www.badweatherbikers.com/buell/messages/290 431/381066.html http://www.badweatherbikers.com/buell/messages/290 431/357683.html There are more threads, but those are sufficient. (Message edited by froggy on November 04, 2009) | ||
| Hogluvr |
I'm gonna have to look into either spools or one of those Pit Bull stands myself, too bad I couldn't use the Centerstand from the S1 I just sold, that thing worked great on it! |
