G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   2stang Posted on Tuesday, July 21, 2015 - 11:44 am:        -Buell race front rotor, older design, has notches on I.D., 5mm thick. Has been tracked, but still runs true, will prep/de-glaze. ----$275 -Braking scalloped rear rotor, low miles, hardly any wear.----$75 -EBR front rotor mounting kit, used on above front rotor.-----$100 -EBR qucik release/dry front brake line.----$275 -ZTL2 front caliper with Vesrah VD-9038JL sintered pads, 70% of pad left.----$300 -CRG shorty brake lever, black, fits stock brake master.----$60 -CRG shorty clutch lever,black, fits stock clutch master.----$60 -Ohlins steering damper, complete, good shape.----$375 -Precision engineering billet rear brake pedal.----$50 -Precision engineering billet shifter.----$50 -Precision engineering billet heel guards.----$50 -Drummer SS slip-on, good shape, low miles. Tip is bent, will try to straighten before sale.----$500 -Power commander V with supposed custom map for Drummer slip-on. Never ran bike. Back of unit missing. Will connect to computer and verify map.----$ make offer -K&N 1125 air filter.----$25 -Showa race shock with Hypercoil 550 Lb/in spring. Just freshened, new seals and nitrogen recharge. Also comes with Showa 575 spring.----$650 -Ohlins TTX36 shock with 10.5 N/mm spring. Shock is in good shape, no leaks.----$850 Most of these parts came off a bike I'm parting out. All part conditions are based on what I see. I did not ride the bike. I've been a machinist and motorcycle mechanic for 10+ years, so my knowledge is high. I have a ton of stock parts available as well, including an engine. Engine has cracked swing arm pivot, so needs cases, but can part out. Thanks Joe   2stang Posted on Wednesday, July 22, 2015 - 11:08 am:        All PMs responded to!   2stang Posted on Wednesday, July 22, 2015 - 01:13 pm:        Ohlins damper, crg levers, and precision engineering parts sold!   Shawns Posted on Wednesday, July 22, 2015 - 03:05 pm:        May be interested in the rear rotor, could you post a pic?   Theshinenz Posted on Wednesday, July 22, 2015 - 04:19 pm:        What weight rider is ohlins set up for?   Shawns Posted on Wednesday, July 22, 2015 - 05:07 pm:        Could use a steering stem nut as well.   2stang Posted on Wednesday, July 22, 2015 - 06:15 pm:        Shawns- I'll snap a pic of the rotor and post it up tonight. I'll see if I have the other parts you PM'ed about as well. Theshinez- The spring on the Ohlins is rated for a rider 200-225.   2stang Posted on Thursday, July 23, 2015 - 12:31 am:          2stang Posted on Thursday, July 23, 2015 - 12:35 am:        NEW PARTS ADDED Ilmberger keyless gas cap----$100   Nobuell Posted on Thursday, July 23, 2015 - 09:47 pm:        Is the EBR quick release brake line available?   2stang Posted on Thursday, July 23, 2015 - 11:38 pm:        Yep, dry brake line still available.   2stang Posted on Friday, July 24, 2015 - 11:13 am:        Gas cap sold!   Nobuell Posted on Friday, July 24, 2015 - 12:04 pm:        PM Sent   2stang Posted on Friday, July 24, 2015 - 12:49 pm:        Nobuell, I PMed you this morning, but have not received and PMs from you. Email me direct at 234viper@live.com Thanks Joe   Shawns Posted on Friday, July 24, 2015 - 11:04 pm:        I am interested in the rotor and the other parts I PM'd ya about. What kind of rotor and stator setup does the busted engine have? (Message edited by Shawns on July 24, 2015)   2stang Posted on Saturday, July 25, 2015 - 10:17 am:        Shawns- I'll do $150 shipped for the rear rotor, starter, nut, and guard. PayPal is 234viper@live.com, to family and friends please. I haven't dug into the stator side of the broken engine yet.   Shawns Posted on Saturday, July 25, 2015 - 10:54 am:        Payment sent foe those items. Would be interested in the rotor/sprag assay and stator when you dive into it. Do you gave CR bars?   2stang Posted on Saturday, July 25, 2015 - 11:23 am:        Shawns- Got money! Will ship parts first thing Monday. No CR bars.   2stang Posted on Monday, July 27, 2015 - 03:27 pm:        Shawns- Your parts shipped today. You should see them Wednesday.   Shawns Posted on Monday, July 27, 2015 - 05:21 pm:        Danka   Theshinenz Posted on Tuesday, July 28, 2015 - 03:04 am:        can you email some pics of the shocks to me, theshinenz@gmail.com cheers Scott   Theshinenz Posted on Tuesday, July 28, 2015 - 03:07 am:        silly question but how do you get the bolts for the caliper in with that rotor? doesnt appear to be bolt holes etc?   Nobuell Posted on Thursday, August 06, 2015 - 04:29 pm:        I spun the bearing in my Mag track wheel. I am looking for a rear wheel to use as a spare for my rain tires. Does not have to be pretty.   Theshinenz Posted on Thursday, August 06, 2015 - 07:57 pm:        Looks like 2Stang has gone AWOL ?   2stang Posted on Friday, August 07, 2015 - 04:51 pm:        Im still here guys, been busy with racing and trackdays. Theshinenz- I take those pictures tonight. Nobuell- I do have a wheel. I'll post a picture tonight.   Zac4mac Posted on Friday, August 07, 2015 - 10:11 pm:        Is the dry brake line still on the table? If so Paypal is ready. Z   Shawns Posted on Friday, August 07, 2015 - 11:08 pm:        Check out the stator and rotor yet? Have any injectors and pressure switch from the motor?   2stang Posted on Friday, August 07, 2015 - 11:23 pm:        Z- Dry brake line sold, sorry   2stang Posted on Friday, August 07, 2015 - 11:29 pm:          Jeepinbueller Posted on Wednesday, August 12, 2015 - 01:03 pm:        How the condition of the starter/sprag gear and housing on that engine, stang? Mine went up, though I'm still tearing the alternator side down to see what exactly is broken (try to start the bike and I hear the starter just spinning freely). Might take those off your hands if everything looks good!