| Author | Message | ||
     Jsunstar |
looking for an ignition module for my 94 sporty or my 95 s2, i have one between the 2 bikes...i cooked my dyna 2000 the other day...man! anyone have anything layin around? thanks jason | ||
| Fester99 |
I am looking for any color Rear wheel that will fit a 98 S1. I am not worried about the condition other than it needs to be straight and true. It will be going to get cut and widened, then off to powder coater. SO let me know what you got. email me at Fesdoggy@yahoo.com | ||
| 1320 |
Parts Wanted: XB Front Brake Rotor w/hardware Any Buell Rear Brake Caliper Thanks! | ||
| Firemanjim |
Jason,maybe,but will have to dig.Jim. | ||
| Smkdm2 |
I need a drive belt. The city put down oil and sharp rocks and it cut my belt! Anybody got a used but nice drive belt!? Thanks | ||
| Loki |
Anyone have a carb hanger laying around being absolutely useless at this time? | ||
| Buelliedan |
Smkdm2- I have a used belt I could let go for $60 plus $10 to ship Loki- I have a carb support bracket I could let go for $20 plus $5 to ship | ||
| Gentleman_jon |
USED XB 9/12 CHEESE GRATER,( LICENSE PLATE HOLDER) WANTED. ANY CONDITION. | ||
| Tikiman1 |
Wanted: Used or new D&D pipes for an XB bike. Also looking for Front Brake lever, and right foot peg bracket driver, not the peg. | ||
| Smkdm2 |
BuellieDan, you gots mail. Thanks. | ||
| Kmkommes |
I'm need a new speedometer housing for a 2003 Lightning, not sure if the firebolt speedo is the same. I got brake fluid on the clear plastic and it wrecked the finish. Speedo works fine, I just need the plastic housing though I will buy whole unit if I have to. Could also use plastic mount that the flyscreen bolts to. | ||
| Shev |
wanted: flyscreen, front fender and a chin fairing for a X1 race stripe (red) thanks. edited by shev on July 07, 2004 | ||
| Firemanjim |
Jason,I have one with a seven pin plug from 1995 S-2.$10.00 + shipping.Where do you want it?Jim. | ||
| Mtbdavid |
Looking for 98 S1 Lightning shifter. My stock shifter was bent beyond repair last weekend when my bike fell over. If anyone has the triangular chrome piece in good shape, which holds the foot peg and attaches to the linkage bar, please let me know how much you want for it. Thanks, David 510-552-0529 | ||
| Steveford |
Wanted: Mounting hardware for 2.5" carbon Borla cannister to go on a 98 S3. Thanks in advance, Steve Ford Buell1000@netscape.net edited by SteveFord on July 07, 2004 | ||
| Loki |
Tim, addy has been sent All, Thanks for the responses for the carb hanger. | ||
| Lowelltroll |
I'm looking for taller bars for my '00 cyclone w/ tach kit. '96 S1 bars have been suggested by one of our compatriots. Anyone got a set they're willing to part with? | ||
| Vindigni714 |
Lowelltroll, There's a set on ebay,}right now. Johnny V } | ||
| Lowelltroll |
Thanks Johnny, Wouldn't have the auction # handy would you? Otherwise I'll look for it tomorrow when I've got some time. Lloyd | ||
| Whodom |
Wanted: Centerstand for tubeframe Buell (S3), made by Don Shalla Enterprises (http://www.cyclelifts.com/buellcs.htm) or similar. Shalla has discontinued the Buell stands. Hugh Odom whodom2001@yahoo.com |
