| Author | Message | ||
     Firemanjim |
Cleaning out the shelves and have a bunch of stuff to liquidate. S/E aircleaner insert, new black $10 1 early tuber rear axle, $1.00 5-6 sets of aircleaner standoffs, for S-2 or race aircleaners,$1.00 a set 1 swingarm isolator spacer,$1.00     I have pics of individual parts if you need em. (Message edited by firemanjim on January 08, 2009) (Message edited by firemanjim on January 09, 2009) (Message edited by firemanjim on January 14, 2009) | ||
| Bluesboy |
P.M. sent.B.B. | ||
| Brinnutz |
I'll take the headbolt covers. | ||
| Cbiv |
I'll take the sprocket cover. | ||
| Cbiv |
Interested in the Penske shock to, send me PM. | ||
| 80rs427 |
Put me down for the switch housing, the petcock, and the speedo reset button. Put me in line when the shock comes up. | ||
| Ratbuell |
Correct me if I'm wrong, but the collapsible pushrod tubes are evo big twin, yes? All the Buells I've had were solid tubes, head-off to remove 'em. That aside, if the pushrod bases aren't spoken for put me down for 'em. Which sealing surface (just so I know) - pushrod o-ring, or seal to case? Tough to tell in the pic. | ||
| Fuzzy |
i could use the shifter rods for the ends. pics show 2? collapsible pushrod tubes to go with the bases? | ||
| Funjimmy |
Put me down for the titanium axles and Penski shock. | ||
| Jayvee |
I'll take the Ti Axles, if Funjimmy doesn't. (Message edited by jayvee on January 09, 2009) | ||
| F_skinner |
Jim, I will take both sets of Pro Series plug wires. Frank | ||
| Kalali |
Wow, you guys are quick on the trigger... Looks like all is gone before sunrise... | ||
| Road_thing |
Jim-I'll take a set of the axle adjusters. rt | ||
| Firemanjim |
OK. BB got the headbolt covers,silver SE insert, and a set of standoffs. Cbiv got sprocket cover 80RS got petcock,switch housing,and speedo reset. Rat got the bases BTW Rat, the collapsible tubes are aftermarket for use with adjustable pushrods.Stockers were all like the chrome ones pictured.I dings are on the pushrod side and look to me like a bit of judicious sanding will fix em. Fuzzy got the shifter rods. FSkinner got the wires, RT got a set of axle adjusters. (Message edited by firemanjim on January 10, 2009) | ||
| Brinnutz |
Damn, thought I had those bolt covers. LOL | ||
| Cbiv |
PM sent | ||
| Bluzm2 |
Jim, I'll take the speedo cable and the tach. I'll call you, I have a question anyway... Brad | ||
| Buellsrule |
Put me in line for the Penske shock. Thanks. | ||
| Motoliam |
Jim, I'm back in SF area, would like to connect over some things. Send me your phone number please. Thanks, Liam. | ||
| F_skinner |
Jim, I sent a PM but just in case my email is f_skinner@yahoo.com (ref: plug wires)... Frank | ||
| Firemanjim |
I sent off the stuff to RT, Cbiv,Fuzzy,and BB. The rest of you guys need to send me addresses. Brad, 80rs,Rat,Skinner. | ||
| F_skinner |
PM sent again... Let me know if you don't get it Jim, Frank | ||
| Fuzzy |
damn guy sent the parts off but never told me where to send the money!!! | ||
| Rwall |
Jim do you still have axle. Rob | ||
| Firemanjim |
OOPs, scratch BB, that was to a guy on Adventure Rider. And my e-mail is my Paypal. And I know where to find all you lot. Rob, the stocker, sure do. | ||
| Slc4me |
If the two pairs of axle blacks/adjusters are available i would like them | ||
| Velocity |
Firemanjim, If the fellow did not take the adj. pushrod covers and the bases, Im interested. What do you need for them. Scott | ||
| Firemanjim |
Sent off Skinners,Brads,BBs,and pushrods,still need addy on 80rs and Rob. | ||
| 80rs427 |
Email just sent with address....... | ||
| Wile_ecoyote |
Looks like a hell of a "fire" sale.........Yeah had to do it. |
