| Author | Message | ||
     Sgtbuell |
Loki You have mail | ||
| Loki |
got mail, no problem | ||
| Sgtbuell |
Loki DC BRAG has picture of a black M2 with the hyper charger. That just looks to sweet. Can not wait to put it on my Black 02' M2. Only difference between that bike and mine is I will have the small bar end mirrors installed. | ||
| Loki |
CRG mirrors? Good stuff, good to know you are looking fwd to putting the Hpr-Chgr on your ride. Have to send me a pic or two with it mounted. I have gotten good and bad feedback from the CF ham-can vs. the Hpr-Chgr on the S1. From a looks standpoint that is. Later and good riding to you, Bry | ||
| Loki |
SgtB, the previous package number is the ref#, the actual track# is:1Z2E56E61242089898 | ||
| Lornce |
Hyper Charger intake: includes K&N filter. Believe some part of the butterfly operating device *may* be missing, but am unsure how it actually works. (these parts may be all there is to it?) Would appreciate any advice from others who know these pieces. Bought on a whim for my S3 but plan to use a repaired CF ham can instead. $90 + shipping. best, Lornce | ||
| Sgtbuell |
Loki Yeah CRG mirrors. Been waiting for ever to receive them from Sporttwin. They are apparently on serious back order. I myself have been waiting for mine since 16 August. | ||
| Loki |
Don't even tell me that, I need a replacement one. They are good mirrors though. | ||
| Sgtbuell |
You might want to give American Sport Bike a call and see if they are back ordered there as well. | ||
| Mikej |
XB9, I can't get back to my e-mail right now. That's a great price, but I'll have to pass for now. Delaying the project for a bit due to other needs. Bummer, but life is like that at times I guess. Thanks though. MikeJ | ||
| Loki |
Loki's Hpr-Chgr is sold, Thanks Sgtbuell. Twodogs, on the racewinder? Loki | ||
| Leeaw |
Force Sidewinder sold! Still have stock M2 seat. | ||
| Blasterd |
Sgtbuell, I have a hypercharger on my black 2000 M2. I am actually wanting to trade out for a different type of intake.(prefer Forcewinder) The hypercharger does look sweet though. Ken | ||
| Ezblast |
Yo Loki & Sarge - you can find a direct link for CRG in the Thumper Links to stuff you can't find here in the Thumper KV section - hope that helps! GT - JBOTDS! EZ  | ||
| Sgtbuell |
Loki Got the hyper charger last night. Great condition. I do how ever have some questions about installation. The vacuum line I think I have figured out but could use some help. What I do not understand at all is where to mount the breather filter. Also does the K&N filter need to be cleaned or do have a while before I should take care of that. Again great looking hyper charger. | ||
| Loki |
SgtB -the little vaccum line, pull the line and voes switch off the carb fitting and insert between them. -the breather filter, that would be another story. That is an extra item, not part of the kit. The threaded tee fitting is what you can screw into the adapter and route the lines to it without the breather. Choosing to use the breather filter, you just need to locate a spot for it and hang it. Look in the KV under the breather section for some ideas. The previous owner had this one hung under the Hpr-Chgr, always made a mess on my boot and leathers. Personally I would just tee the lines and run a single down and back. Dump it out where all the other vent lines are. -As long as it is off the bike I would open it up and check/clean the filter. At the very least brush off any trash that has collected on it. Being as since I was riding in the buggiest state I know off, Delaware....... If you have any problems let me know, I think I got it all in the package. I am out the door and headed towards Detroit Rock City for the weekend......... | ||
| Sgtbuell |
Loki I figured as much on the vacuum line. Thanks for clarifying. As for the breather filter still a little lost, guess I will have to hunt in the KV section as you suggested. Thanks for the info. | ||
| Orion |
I'm selling a couple of stock items off of my 2000 M2 on e-bay. http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1&category=35574&ite m=2436158166 http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1&category=35573&ite m=2436159909 I also have some V&H shortshots for a softail if anyone is interested. Not sure what years they fit. They're on a 2000 Night Train right now. | ||
| Essjay |
Looking for a stock airbox cover for a '99 S3T. I want to use it as a mold to build an extension onto the lower fairing. Shane | ||
| Brion |
2000 S3T Faring Forest Green.  |
