| Author | Message | ||
     Jsunstar |
cmon, somneone has to have a set of switch controlls and a clutch lever for 7/8 bars! dig fellas, dig! i wanna get this thing on the road! thanks jason | ||
| 2003xb9r |
Wanted: stock derby cover for S1 davidturner@paradise.net.nz | ||
| Gypsy |
Wanted: S1 small tail section and seat black if possible. E-mail me at:violas@ameritech.net | ||
| Spiderman |
Ok all you old sportster junkies!!! Wanted: Swing arm from 69 to 78 sporty Shocks for a 69 to 78 sporty Any help would be appritiated. 734-355-7453 leave a message if I don't answer or slimspidy@yahoo.com | ||
| Gpurdue |
Need black body parts except tank, 2000 M2. Yellow available, excellent except tank is average. Changing colors. | ||
| Shotgun |
Wanted: Bar-end mirrors to fit 01 M2. Scuffed ok. Tired at looking at Mickey Mouse's ears on the stock mirrors. | ||
| Cliff |
I'm an idiot. I ask for a list of parts last month, and not one responce. I checked my posting and I had given the wrong email address. So here we go again. I was ran off the road out by Bartlet lake and need, 1 front wheel for 99 M2 black, both front tubes, Front faring for cyclone (does not have to be stock, just has to accept round light), right side controls and mirror. I'm Ok, the jerk who ran me off the road did not even stop!!!! You can reach me at vkitts2434@aol.com or call collect to phoenix at 602-569-1209. | ||
| S1joel |
I am looking for a carbon fiber fairing and front fender for an S1. Looking to save a little money. If anyone knows a dealer that has them in stock at a bit of a discount let me know. I will take anything new or slightly used. Thanks. Joel Joel712@earthlink.net | ||
| Buellnprdyc |
i need a way to lower a 99 m2ne 1 have any thing i can use reasonably priced | ||
| Richardm2 |
Looking for a set of cylinders. | ||
| Aaron |
Richard: silver, black, or black w/polished fins? I have a set of the latter, honed and ready to go. | ||
| Richardm2 |
Aaron you've got mail | ||
| Twodogs |
richardm2, you've got mail | ||
| Jsunstar |
anyone got a flyscreen laying around they can part with? doesnt have to be perfect, just cheap. thanks jason in the burgh! | ||
| M1a65 |
Hi, Like to find someone willing to part with their oil tank. Aluminium or plastic. Frank @ m1a65@hotmail.com | ||
| Snake |
Wanted:Used Aluminum oil tank for a s1 Lightning. I'm willing to pay up to $200.00 for a good used one. Any leads would be great!! | ||
| Jsunstar |
i am looking for a set of aluminum pegs. the skinny ones, not the fat ones. also, still need a flyscreen too. thanks! jason | ||
| Jasonblue |
Lookin for: air filter box cover/03' 9S/ Houston, Tx./ chrisjay@ev1.net Not looking for the airbox cover,I want the inner cover directly over the filter. Drilled a bunch of holes in mine and want an unmodified backup. | ||
| Vindigni714 |
Jsunstar, You've got mail. Vindigni714 | ||
| Fnrage |
Anyone have a set of passenger foot peg brackets for an X1? color and condition are of no concern. Possibly someone who now has rear sets with no itention of using the old brackets again. |
