| Author | Message | ||
     Williamscottrobertson |
I just ebayed up a set of HD stock saddlebags for the blast. I got them and now I cant figure out how to put them on. Sure, they go right under the seat, but then there are three other straps, one clip and two pull restraints. These hang under the seat and when i hook them together they rub against the wheel guard. Does anyone else have this problem or know how to put these pesky things on? | ||
| Jprovo |
The two bags tie to the passenger footpegs with the "pull restraints"... I don't have a copy of the installation instructions, but someone on here should. James | ||
| Gearheaderiko |
The 2 loops go around the passenger pegs. The middle cross strap under the seat goes just in front of the seat locater posts. The straps with the clip go to the rear of the bike over the turn signals and clip together under the tail light. They may not seem long enough, but will stretch a little with use. I can fax you the instructions if desired. | ||
| Williamscottrobertson |
Awesome! Thanks for the help! If you would like to fax the instructions, please send it to 706-541-0765. | ||
| Gearheaderiko |
Did you get the fax (sent 12/21 10pm PST)? | ||
| Williamscottrobertson |
yes i did. thanks for your help. sorry i havent been around a computer for a while to post. | ||
| Robi |
Hey, I just got some saddle bags and would like a gander at those instructions. Are they posted on here at all? Does anyone have them scanned? |
