| Author | Message | ||
     Advoutlander |
Will brake and clutch levers from any xb fit the ulysses or or are the ulysses levers specifc? | ||
| Froggy |
All XBs use the same clutch lever (available in a few different colors), but the brake lever depends on which brake setup you have. If you have the ZTL1 (6 piston) brake, it uses a specific lever, and then the ZTL2 (8 piston) bikes use a different but similar looking lever. All Ulysses models use the ZTL1 6 piston setup stock, so you can use the same levers as any other ZTL1 6 piston XB. The levers are available in a few different colors, but I believe all but the black and "silver" colors are discontinued. | ||
| Advoutlander |
Thanks for clearing that. | ||
| Teeps |
And, don't waste your $$$ on the chinese knockoffs', found on ebay, either... Don't ask me how I know. | ||
| Zac4mac |
Teeps - they can't be any worse than the CRGs I have on my Uly(09). They came off an 04 Lightning. Effin things rattle like they're on a Harley. Oh wait... I'm just glad I didn't have to pay for them too. They were given to me because they rattled so bad. They do look good and work well. Z | ||
| Teeps |
The knockoffs could be brought up to "par" by correctly sizing the pivot hole with a bronze bushing. Now they just have a hole in the aluminum, that is too big... | ||
| Desertjeff |
I really like my cheep Chinese knockoffs they work great and don't rattle but they have only been on for a couple thousand miles. Could be I might rethink this someday. |
