| Author | Message | ||
     Nobuell |
Last year I replaced the stock bars on my 08XT with the bars shown in the picture. The clutch, throttle and brake lines are longer that I would like. What bike model should I use to order shorter cable lengths? Thanks for the help.  | ||
| Skinstains |
Determine the length you want and have the good folks at "Motion-Pro" build you a set. | ||
| Froggy |
Looks like a Lightning handle bar, so the Lightning cables may be your best bet. | ||
| Nobuell |
Thanks Froggy. Since the Buell site is down, I could not do a comparison. | ||
| Dbolemiss |
Do you have your old stock bars that you might want to sell? | ||
| Pos90 |
On my Uly I kept the stock lines but if you can get an estimated length I've got brake lines from my '06 Ss and a Stt. Be sure to get the front wheel off the ground when you measure so the fork is fully extended. | ||
| Johnboy777 |
Hey Nobuell Which handlebars are those? Thanks | ||
| Nobuell |
Dbolemiss - I do have the stock bars but prefer to keep them just in case. Johnboy777 - They are the Protaper school boys. I did not like the upright ride of the stockers. To me, they make the bike feel more like a sport touring bike. Similar to my old BMW. They are very comfortable to me. |
