G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Ratbuell Posted on Friday, July 10, 2009 - 04:54 pm:        That's Inner Diameter... Looking for a spec, so I can make an adaptor tube. I have a pair of work stands for my tuber rear axles, that pin/slide right into the axle and hold the bikes steady to work on. Until I can get a pair of spools mounted to my Uly's swingarm...I was thinking of making a bar that will fit in the Uly axle, and be drilled to match the tuber axles, so I could use my tuber stands.   Etennuly Posted on Friday, July 10, 2009 - 05:00 pm:        It measures 3/4". I would think you would want to go a little smaller for ease of sliding in and out.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: