Author |
Message |
Sprintex
| Posted on Monday, September 29, 2008 - 12:00 pm: |
|
Is the 06 prewired for the Buell heated grips? If so where is the lead? I going to put some after market grip heaters, Dualstar or Polly heaters. On my BMW K75 I used to own, I just used the connecter that was already wired under the tank. I looked under the fly screen and didn't see any blank connectors. So are they there? |
Froggy
| Posted on Monday, September 29, 2008 - 12:11 pm: |
|
All 08 and later Buells have a plug under the flyscreen for it. For the earlier bikes you will need to spice into the cigarette outlet. Adds 5 minutes. |
Geopatr
| Posted on Monday, September 29, 2008 - 12:46 pm: |
|
I have the factory grips on my 06 Uly. The kit came with all the wiring you need. It is plug and play install. You'll have to drill a hole in the left handlebar and the kit comes with template for that as well. The factory kit isn't cheap, but is worth it. |
Longdog_cymru
| Posted on Monday, September 29, 2008 - 02:33 pm: |
|
I bought an '07 RHS set of switchgear from American Sport Bike. This comes with the plugs to splice into the accessory socket wiring and the 2 Deutsch connectors for the standard Buell heated grips. I then purchased the 2 matching Deutsch connectors from Batts Racing and fitted them to a set of Polly Heaters. The result is a neat set of heated grips, less expensive than the factory set-up, (for me anyway), and warm hands!!! Links are here........ http://www.battsracing.com/ http://www.americansportbike.com/ http://www.pollyheaters.com/ph400.htm http://warmfit.com/ |
Sprintex
| Posted on Monday, September 29, 2008 - 02:45 pm: |
|
Great info, thanks. |
Lost_in_ohio
| Posted on Monday, September 29, 2008 - 06:15 pm: |
|
I like my bar end weights so what are my options. |
Rotorhead
| Posted on Monday, September 29, 2008 - 06:49 pm: |
|
The Polly heaters get so hot you can shove them all the way to the bend (that don't sound right) and still have the bar end weights. I have brush guards shoved about 1.25 inches and the Polly heaters work fine still. Only have had to use the lower setting. I said shove twice!! |
Froggy
| Posted on Tuesday, September 30, 2008 - 01:36 am: |
|
HVMP bar ends and Buell OEM heated grips? Check.
|
Longdog_cymru
| Posted on Thursday, October 02, 2008 - 11:26 am: |
|
I found the thread that gave me the idea for using the '07 Buell switchgear. If anyone is interested, here it is.......... http://www.badweatherbikers.com/buell/messages/171 43/350332.html?1207442985 And here are the part numbers for the Deutsch connectors I bought http://www.badweatherbikers.com/buell/messages/384 2/361649.html?1211209021 Thanks to jackbequick for that |