|Posted on Friday, August 09, 2019 - 12:06 pm: ||
Hi everybody Iím new with Buell bikes very fun ride but hard to find people or shop to work on it I need a fuel pump and sensor done does anyone know a shop or someone in Maryland that can work on this issues
|Posted on Friday, August 09, 2019 - 01:23 pm: ||
SPHDOnline sells them new and they are easy to replace:
Hang the rear of the bike off the rafters or A-frame ladder.
Remove the lower shock bolt and let the swing arm hang.
Use blue tape or tin foil to protect the swing arm paint.
Remove the 1/8"MPT plug in the 4 bolt flange to drain the gas.
Disconnect the electrical plug.
Remove the 4 bolts and pull the flange out, The fuel pump assembly is attached to it.
Sometimes they want to stick in the hole but a carefully guided flat head or even a home-made puller will get it out.
A little half twist and it should clear the swing arm and come out.
Put in the new one and enjoy your beer.
|Posted on Friday, August 09, 2019 - 04:36 pm: ||
Thank you man I will get it done