G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   Malott442 Posted on Monday, March 07, 2016 - 08:17 pm:        I upgraded to Baker 1125R HD springs, which I was under the impression was going to be an upgrade. Is there a seperate spring just for the 1190's? I'm getting major slip in 3rd gear WTFO. Dean Adams exhaust PC5 260lb rider   Malott442 Posted on Monday, March 07, 2016 - 08:18 pm:        I took it apart, inspected plates, and installed IAW the 1125R manual. Steel plates machined side facing inward, last friction plate offset on mounting teeth.   Malott442 Posted on Sunday, March 13, 2016 - 09:36 pm:        1st steel plate faces the other way. I have no clue why I didn't see it in the 1125 manual, but it is in the 1190 manual. Slip is no more. And a word of warning, the Barnett's 1125R clutch springs are softer than the 1190 comfort kit springs. I read in a few sources otherwise, and took their word for it. I guess if you don't plan on giving it full throttle past 2nd gear, or if you weigh less than 180 pounds, it shouldn't be a problem.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: