Author |
Message |
Rz500
| Posted on Saturday, December 22, 2018 - 05:20 pm: |
|
Am finally looking at going to the XB rocker boxes on my S3T and am wondering if I need xb12 boxes or are the 9's and 12's the same. |
Ralph
| Posted on Saturday, December 22, 2018 - 07:22 pm: |
|
Same. |
Kmbuell
| Posted on Saturday, December 22, 2018 - 08:54 pm: |
|
As are Blast parts |
Rz500
| Posted on Sunday, December 23, 2018 - 09:14 am: |
|
Thanx guys, That's what I needed to know. |
Oddalloy
| Posted on Sunday, December 23, 2018 - 10:51 am: |
|
Rz500... I picked up a set of used XB Rocker boxes, pcv valves, and gaskets thinking I was going to put them on my S1 but what I've discovered after about 3000 miles is... my S1 doesn't puke oil and so I'm not going to put them on. I'd be willing to sell, PM me if you're interested, I'll send you some pics and we can discuss. |
Dave
| Posted on Monday, December 24, 2018 - 10:15 am: |
|
Blast parts? Ingenious. Front and rear rockers are there same or simply work? How about that. DAve |
Upthemaiden
| Posted on Monday, December 24, 2018 - 10:55 am: |
|
Front and rear are different only because of the position of the valve, but some people recommend using a front cover on the rear cylinder(or possibly the other way around, but I think that's right) because sometimes clearance is tight between the PCV valve and the bottom of the gas tank. |
Harleyelf
| Posted on Tuesday, December 25, 2018 - 11:29 am: |
|
If you mount the rocker cover with the vent facing down, you will puke oil out of the vent tube. They must be at the high point or they are in the oil, not venting air. |
|