G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   Ajturbo Posted on Saturday, October 21, 2017 - 10:52 pm:        My clutch is starting to slip, ever so slightly when i doing 70 in top and i accelerate hard. ( an only then.... at the moment) what do you guys think i should do? is there an up grade? or Just renew the plates? cheers   Bluebueller Posted on Sunday, October 22, 2017 - 12:17 am:        my opinion, and as an 18 year long year owner of an original M2, barnett clutch kit is pretty good. an easy swap if you invest in the clutch spring compression tool. this is a job you can do even if you are not super mechanically inclined, as long as you follow the directions. There is some talk about the 'grenade plate' - so research your options here, but overall an easy upgrade worth doing.   Mhlunsford Posted on Sunday, October 22, 2017 - 11:14 am:        I just did the engeryone extra plate kit and got their tool as well. About 2-3 hrs to do it. I got the cluch kit for 120 and tool 45 eBay. If your primary has an old gasket get that too & clutch cable seal if you remove.   Ajturbo Posted on Monday, October 23, 2017 - 10:57 pm:        Thanks guys..!!!!

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: