G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Buell Forum » Old School Buell » Archive through October 16, 2013 » 99 x1 exhaust modification « Previous Next »

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

Tony302
Posted on Tuesday, October 01, 2013 - 04:21 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

I have a stock 99 x1, I want to get rid of that big ugly muffler. could I take that off and have a straight pipe with a angle tip built in and if I do would I hurt the motor??
Top of pagePrevious messageNext messageBottom of page Link to this message

Lakes
Posted on Tuesday, October 01, 2013 - 05:15 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

you can do that, it will just be very loud. won't hurt motor , if it does not run strong wide open throttle under load, check jetting but if it runs strong it's ok as it is. what carb does it use now? & what is the jetting?
Top of pagePrevious messageNext messageBottom of page Link to this message

Tony302
Posted on Tuesday, October 01, 2013 - 05:34 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

well the 99 x1 are fuel injected I do not have to get a power commander if its exhaust right?? just for the intake?
Top of pagePrevious messageNext messageBottom of page Link to this message

Tony302
Posted on Tuesday, October 01, 2013 - 05:35 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

I do not mind it being loud is just I hate that ugly bulky muffler.
Top of pagePrevious messageNext messageBottom of page Link to this message

Natexlh1000
Posted on Tuesday, October 01, 2013 - 10:29 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Don't waste your money on a power commander.
The Buell ECUs conflict with them and they do wrong things.
A straight pipe is sucky for performance.
Your best bet is to get a somewhat loud muffler.
The OEM "truck muffler" has a torque dip in the midrange. This was done on purpose to that steady cruise is most quiet.
You have to downshift it to make it do anything.

My personal loud pipe is a "daytona boss" they no longer make them and the mounting hardware was trash.
The performance of the damn thing is night/day between the stocker though.

Try to get your hands on a supertrapp or a V&H.
My only objection to the V&H is that you have to drop the muffler to change the tranny fluid.
Top of pagePrevious messageNext messageBottom of page Link to this message

Kilroy
Posted on Tuesday, October 01, 2013 - 11:49 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Best bet is D&D slip on. Bullet proof, very nice sound (loud)
Top of pagePrevious messageNext messageBottom of page Link to this message

Tll130
Posted on Tuesday, October 01, 2013 - 11:55 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Heard the torq hammer exhausts were pretty badass to
Top of pagePrevious messageNext messageBottom of page Link to this message

Firemanjim
Posted on Wednesday, October 02, 2013 - 12:46 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

The reason the Power Commander had troubles with Buells was the "learned fuel" area, if you did not add fuel here you were fine. Too many people just tuned it as normal and it was good until they went for a ride, then bam the ECU adjusted and the bike ran like crap.
Top of pagePrevious messageNext messageBottom of page Link to this message

Tony302
Posted on Wednesday, October 02, 2013 - 07:56 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

ok so as far as power commander what do you guys recommend to do then??I plan on taking those big plastics off the bike eventually. I like to know, what to shop for when I get ready to do it all.
Top of pagePrevious messageNext messageBottom of page Link to this message

Ratbuell
Posted on Wednesday, October 02, 2013 - 12:42 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

The supertrapp is a good muffler.

The V&H is junk. run one long enough and it will shake itself to bits.

I'd go supertrapp internal disc. Sound, backpressure, and flow-tuneable.
Top of pagePrevious messageNext messageBottom of page Link to this message

Tony302
Posted on Wednesday, October 02, 2013 - 01:01 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

What about the d&d??the price for one of them is not too steep.
Top of pagePrevious messageNext messageBottom of page Link to this message

Kalali
Posted on Wednesday, October 02, 2013 - 02:16 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

I know some folks have had bad experiences with V&H SSR2 but mine has been rock solid for the past 20K miles. I did put an extra bead of weld on the rear bracket as a preventive measure since that appears to be the weak spot on these mufflers.
Whatever aftermarket exhaust/intake combination you choose, you'll need to tune the fuel maps to account for the leaner mixture. A Race ECM or replacing the stock maps with the Race fuel/timing maps will address that issue. If you go the D&D route, make sure you replace the front hanger with a Y hanger to handle the weight and the stress. My V&H has been just fine with the stock pre-01 hanger.
Top of pagePrevious messageNext messageBottom of page Link to this message

Tony302
Posted on Wednesday, October 02, 2013 - 03:11 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Ok so how much am I looking at for the map sensors or where were would i look to get them?
Well my exhaust hangar is the newer version that was replaced from the stock one that usually broke.
« Previous Next »

Add Your Message Here
Post:
Bold text Italics Underline Create a hyperlink Insert a clipart image

Username: Posting Information:
This is a private posting area. Only registered users and custodians may post messages here.
Password:
Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.)
Enable HTML code in message
Automatically activate URLs in message
Action:

Topics | Last Day | Tree View | Search | User List | Help/Instructions | Rules | Program Credits Administration