G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   Judotrip Posted on Thursday, October 02, 2008 - 11:48 am:        So I had this back out on me twice now...I used the proper locktite(blue), but didn't hold...Scary moments when trying to downshift and the shifter is hanging off..... Any nifty tricks out there? Thanks, Judo   Brinnutz Posted on Thursday, October 02, 2008 - 01:37 pm:        Happened to me, loctite and some good elbow grease fixed it.   Judotrip Posted on Tuesday, October 07, 2008 - 05:06 pm:        I think I got it...more locktite...correct torque and a dab of silicone caulk on the bolt head to hold it... works great....   Captainkirk Posted on Wednesday, October 08, 2008 - 12:22 am:        Judo......twice is a warning signal. I would drill the head and safety wire.   Judotrip Posted on Thursday, October 09, 2008 - 11:43 am:        Captain- Not a whole lot to safety wire to down there. I cleaned the bolt through and used a lot more locktite.An old biker gave me the silicone idea, which served two purposes. Holds it in place and lets me reference if it is backing back out.I did a 400+ mile ride over the weekend and it seemed to stay put. I was really keeping an eye on it though and kept my toe touching the lever to keep it vibrating too much.seemed fine.thanks, Judo

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: