| Author | Message | ||
     Yohinan |
Anyone know where I can find this tool at the cheapest price? I am in the San Diego area if that makes any difference. Also I dont mind ordering online and waiting a week or two to get this if that saves me some cash. Thanks for the help. John | ||
| Al_lighton |
http://www.americansportbike.com/shop/cgi-bin/cp-app.cgi?usr=51F7889514&rnd=1747 091&rrc=N&affl=&cip=69.160.135.44&act=&aff=&pg=prod&ref=16029&cat=&catstr=HOME | ||
| Lrsawyer |
What a pain to get access to the rear cylinder! I found Jim's Exhaust Stud Removal Tool for $77.11 from: http://www.cyborgcycles.com/toolhed.html but the info says it works on up to 02 Buells. I have an 03 XB9S. Anyone know if the exhaust port configuration is the same? Thanks!  (Message edited by LRSawyer on September 11, 2006) | ||
| Beanbiken |
im trying to rotate the engine to get to the rear exhaust stud that broke off. Does any one have some good pics of the process? I have the manual and should have all the part seals jack torque wrench studs and bolts. Im taking some pics as i go. I dont have the pitbull lifts but have a pulley attached to a tree to the rear frame and a $20 jack for the engine. Also unsure about which bolts to loosen for the engine to rotate. Thanks, PS read a couple threads just don't want to get stuck with my engine down. |
