G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Buell Forum » Knowledge Vault (tech, parts, apparel, & accessories topics) » Troubleshooting (Poor Starting/Running/Handling/Ride Issues) » Archive through February 28, 2007 » S1 Flooding problems « Previous Next »

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

Marc_baker
Posted on Monday, April 24, 2006 - 01:58 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

My 97 S1 just starting pouring fuel out of the carb. It Runs ok, but as soon as you shut it down it rains gas out of it. Any ideas? A few times I had a problem with it after riding for a bit, then shutting it down for a while getting back on and it stalling and backfiring when I let the clutch out. HEEEEEEEELP!!!! The Carb and intake are stock.
Top of pagePrevious messageNext messageBottom of page Link to this message

Sparky
Posted on Monday, April 24, 2006 - 02:52 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

It could either be float level slightly too high, dirt/contamination lodged in the float inlet valve, a damaged float needle/seat or a defective petcock. You are turning off the petcock every time you shut off the engine, aren't you? If not, you're risking major engine damage when the carb overflows.

How old is the gas? It could be contaminated gas too.
Top of pagePrevious messageNext messageBottom of page Link to this message

Road_thing
Posted on Tuesday, April 25, 2006 - 10:56 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

You can't solve the problem until you know what the problem is, so you've got to find out where the gas is leaking from:

overflow out of the float bowl (bad float, bad float valve/needle, or a piece of grit in the valve), or

a damaged fuel line or connector, or

something else.

My S1 had a bad float bowl gasket that would only leak when I set the bike on the side stand and left the gas on (I've got a Mikuni carb, but a gasket's a gasket...).

My advice is to pull the air cleaner and try to pinpoint the leak.

rt
« Previous Next »

Add Your Message Here
Post:
Bold text Italics Underline Create a hyperlink Insert a clipart image

Username: Posting Information:
This is a private posting area. Only registered users and custodians may post messages here.
Password:
Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.)
Enable HTML code in message
Automatically activate URLs in message
Action:

Topics | Last Day | Tree View | Search | User List | Help/Instructions | Rules | Program Credits Administration