G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Buell Forum » Knowledge Vault (tech, parts, apparel, & accessories topics) » Engine » Breathers (crankcase breathing system) » Mikuni Breather Bolts « Previous Next »

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

Italialaw
Posted on Tuesday, March 28, 2006 - 08:45 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Will mikuni part no. khs-020 work for a 98 s3? See link:

http://cgi.ebay.com/ebaymotors/Mikuni-Head-Breather-Kit-Harley-Davidson-Evo-93-9 9_W0QQcmdZViewItemQQcategoryZ35572QQitemZ4625710148QQrdZ1QQsspagenameZWDVW

thanks!
Top of pagePrevious messageNext messageBottom of page Link to this message

Bluzm2
Posted on Tuesday, March 28, 2006 - 09:56 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Yes they will.
Do you plan to reroute the breathers to a catch can?

Brad
Top of pagePrevious messageNext messageBottom of page Link to this message

Al_lighton
Posted on Wednesday, March 29, 2006 - 12:47 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Brad,
Are you sure? The reason I ask is that if the nipples swivel as the bolt goes in, it may not be possible to thread them in with the engine in the frame. I seem to recall cutting one of my (non-mikuni) right angle nipples off as the easiest way of unscrewing them when I replaced them with banjo bolts.

If the nipples don't swivel as the bolt is threaded in, or you know that they are short enough, never mind.

Al
Top of pagePrevious messageNext messageBottom of page Link to this message

Italialaw
Posted on Wednesday, March 29, 2006 - 11:36 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

The Mikuni tech stated the KHS-020 bolts are 10mm. They're the "old" style that swivels. 10mm should fit? If I'm able to get a good seal I'll use them b/c I the bolts' look.

Brad and Al,
My set-up will be the mikuni bolts, 5/16" hoses from the bolts routed to a tee, then a 3/8" hose from the tee around the battery and ending near the end of kickstand when it's elevated. The junk will mist into the air.
« Previous Next »

Add Your Message Here
Post:
Bold text Italics Underline Create a hyperlink Insert a clipart image

Username: Posting Information:
This is a private posting area. Only registered users and custodians may post messages here.
Password:
Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.)
Enable HTML code in message
Automatically activate URLs in message
Action:

Topics | Last Day | Tree View | Search | User List | Help/Instructions | Rules | Program Credits Administration