Author |
Message |
Chaseroe
| Posted on Monday, March 21, 2016 - 08:36 am: |
|
Dose anyone know what the measurements are for spacing a float on a stock 40mm carburetor is?? Any help would be greatly appreciated. |
Livers
| Posted on Monday, March 21, 2016 - 04:24 pm: |
|
0.413-0.453 in. from the base to bottom of the float, with the carb tilted 15-20 degrees from the vertical, from rest on the manifold end. 2002 manual on http://www.buellmods.com/. |
Chaseroe
| Posted on Monday, March 21, 2016 - 05:23 pm: |
|
Thanks Livers! Really appreciate it! |
|