G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Buell Forum » Knowledge Vault (tech, parts, apparel, & accessories topics) » Troubleshooting (Poor Starting/Running/Handling/Ride Issues) » Archive through March 21, 2016 » 98 M2 won't run over 2000 rpm « Previous Next »

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

Mazza11
Posted on Saturday, December 26, 2015 - 08:40 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

I have just fitted an S&S Stealth air filter kit to my 98 M2 and it stalls when over about 2500 rpm. I have put a kit through the standard CV carby and adjusted the float as specified in the manual. if I rev and release quickly it will go to higher revs and backfires when revs are coming back down. Please help, I am hanging out to get back on the road.
Top of pagePrevious messageNext messageBottom of page Link to this message

Brother_in_buells
Posted on Monday, December 28, 2015 - 07:35 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

The going to higher rpm when releasing the trottle and backfiring is probably a intake air/vacuüm leak.
That could also the stalling at higher rpm.

Does it backfire through the carb?

Have had this kind of thing with a non buell bike and it was doing the same because of worn out carb and old rubbers and gaskets.
Top of pagePrevious messageNext messageBottom of page Link to this message

Mazza11
Posted on Friday, January 01, 2016 - 09:59 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

cheers for the reply, I have checked for leaks and there doesn't seem to be any. It doesn't backfire through the carb.
I have put a new kit through the carb so rubbers should be fine. I have just re-adjusted the float and about to put it back together. I will let you know how it goes.
Top of pagePrevious messageNext messageBottom of page Link to this message

Brother_in_buells
Posted on Saturday, January 02, 2016 - 03:55 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Okay ,so back fire through exhaust is unburned fuel or a exhaust leak or it's the construction of the muffler.

If there is no intake leak it could also a sign of not enough fuel at higher rpm's
Top of pagePrevious messageNext messageBottom of page Link to this message

Jim2
Posted on Saturday, January 02, 2016 - 05:20 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Does 98 have a VOES? If so maybe it is unhooked, unplugged, or leaking.
Top of pagePrevious messageNext messageBottom of page Link to this message

Brother_in_buells
Posted on Sunday, January 03, 2016 - 06:16 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Good point Jim2!

That could explain the stalling at higher rpm.

What i know is that all carbed tube frame buells have a voes.
Top of pagePrevious messageNext messageBottom of page Link to this message

34nineteen
Posted on Monday, January 04, 2016 - 03:09 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Did you accidentally block of the carb vent hole?
Top of pagePrevious messageNext messageBottom of page Link to this message

Firemanjim
Posted on Tuesday, January 05, 2016 - 04:33 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

What kit in carb, and what jet sizes? And did you make sure the vacuum diaphragm went in correctly--- try raising slide by hand and it should return a a nice measured pace if there is no vacuum leak.
Top of pagePrevious messageNext messageBottom of page Link to this message

34nineteen
Posted on Tuesday, January 05, 2016 - 07:16 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Maybe the needle jet is missing or upside down. That would definitely screw up the mixture at around 2500rpm when the needle starts to come online.

It can fall out when when main jet is removed.


http://www.cv-performance.com/harley-cv-carburetor -tuning-issues/
« Previous Next »

Add Your Message Here
Post:
Bold text Italics Underline Create a hyperlink Insert a clipart image

Username: Posting Information:
This is a private posting area. Only registered users and custodians may post messages here.
Password:
Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.)
Enable HTML code in message
Automatically activate URLs in message
Action:

Topics | Last Day | Tree View | Search | User List | Help/Instructions | Rules | Program Credits Administration