|Posted on Tuesday, July 29, 2014 - 07:47 pm: ||
My '99 S3 had a fuel pump failure (pictures below) Some speculate our ethanol mix.
Installing a fuel pump I'm getting old and forgot where a rubberized washer/seal goes. The fuel fitting or the electrical wiring? (Shown centered .. yes posing between the 2 fittings for the picture only) The fuel pump assy P0130.KB came with a new rubberized washer/seal (see pictures below)
The brass fuel fitting has an O ring seal and the electrical wire has a washer and nut. Both have a rubber seal on the inside of the tank.
(Message edited by dave on July 29, 2014)
|Posted on Wednesday, July 30, 2014 - 07:48 am: ||
|Posted on Monday, August 04, 2014 - 01:01 pm: ||
I don't have mine to look at in front of me but the washer with the seal should go on the electrical connector from what I see working in aviation. Did it also come with a new o-ring for the brass fitting?
|Posted on Monday, August 04, 2014 - 05:19 pm: ||
Thanks for the feedback
In the picture
16: rubber washer inside the tank /electrical brass fitting (new with kit)
20: flat washer external to the tank /electrical brass fitting (new with kit)
13: nut /electrical brass fitting (new with kit)
17: rubber washer inside the tank/fuel fitting (new with kit)
11: o-ring external to the tank brass fuel fitting (new with kit)
|Posted on Thursday, April 02, 2015 - 12:47 am: ||
mind if I ask where you got the new pump and how much? I'm putting a '99 X1 together (I got it in boxes) and the pump may be having issues. Oh, and mine had the large grommet/washer on the electrical feed