G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Buell Forum » Knowledge Vault (tech, parts, apparel, & accessories topics) » Troubleshooting (Poor Starting/Running/Handling/Ride Issues) » Archive through October 27, 2012 » No Turn signals work on my 2000 M2 Cyclone. « Previous Next »

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

Skorka011
Posted on Monday, October 08, 2012 - 02:16 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

None of the turn signals work on my 00 M2 and I checked the fuses and they seem to be alright.
Top of pagePrevious messageNext messageBottom of page Link to this message

Midnight_rider
Posted on Monday, October 08, 2012 - 06:04 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

do you have a manual and voltmeter?

check flasher for voltage and good ground

check all grounds

check for voltage at turn signals

have you been riding in the rain ?
Top of pagePrevious messageNext messageBottom of page Link to this message

Akbuell
Posted on Monday, October 08, 2012 - 07:31 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

+1 on the manual. Check w/Al at American Sport Bike. As Midnight says, 12V to the flasher. Good ground for the flasher. The voltage then goes to the turn signal switch, then to the left and right signals. If nothing works, and 12V to the flasher, the flasher is probably suspect. As long as the wiring and bulbs are good. Multimeter is your friend. Dave
Top of pagePrevious messageNext messageBottom of page Link to this message

Skorka011
Posted on Monday, October 08, 2012 - 10:49 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

The instrument panel does not even register the turn signal. In that rectangle where the oil symbol and nuetral symbol is. The left and right arrows do not show up when the turn signal switch is pushed left and right. I will check the flasher and no I am missing the manual. I've been trying to use the web instead but it is difficult.
Top of pagePrevious messageNext messageBottom of page Link to this message

Reepicheep
Posted on Tuesday, October 09, 2012 - 07:53 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

The 1996 S1 service manual (PDF around here somewhere) would be fairly close to your 2000 M2.
Top of pagePrevious messageNext messageBottom of page Link to this message

Midnight_rider
Posted on Tuesday, October 09, 2012 - 03:07 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

with the key on.. check the flasher wire

that is orange with white stripe take the
red probe of voltmeter connect on terminal
of flasher ..you also have to ground the black probe on meter i usually vice grip it
some where on frame You should have 12v if not bad connection or loose wire

i'm guessing you have to have turn signal
switch on to check voltage on violet or brown wire at flasher terminal... leave wires plugged on terminal work probe in to make contact

i copied form a old post in search





MAYBE A FUSE ?

(Message edited by midnight_rider on October 09, 2012)
« Previous Next »

Add Your Message Here
Post:
Bold text Italics Underline Create a hyperlink Insert a clipart image

Username: Posting Information:
This is a private posting area. Only registered users and custodians may post messages here.
Password:
Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.)
Enable HTML code in message
Automatically activate URLs in message
Action:

Topics | Last Day | Tree View | Search | User List | Help/Instructions | Rules | Program Credits Administration