G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   Bamabuellbiker Posted on Wednesday, July 13, 2011 - 08:02 pm:        After a accident, this frame piece cracked. Would it be better to try to repair it( a shop said they could weld it back) or get a new one. I think it just holds the front flaring and turn signal up so i bet it doesnt hold alot of stress for glue. also look at the other damaged pieces-- any advice on repairs or replacement. the last thing item, when i went down on the left side the handle bar landed with the bar all the way turned left. i think it bent it to far. does it look like it is bent to close to the bike?   Froggy Posted on Wednesday, July 13, 2011 - 08:59 pm:        They are about $100 new, in my opinion you are best off replacing it rather than doing fixes that may or may not work. That piece is made out of magnesium, so if you do weld it, be careful!   Froggy Posted on Wednesday, July 13, 2011 - 09:00 pm:        Also the handle bar tube is cheap, I'd get a new one if the slight bend bothers you.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: