|Posted on Thursday, September 24, 2009 - 08:03 pm: ||
is there a way to change it for a standard petcock as i bought it and my bike isnt Fi.... or if someone else has a tank thats made for a carbed bike and wants to trade
|Posted on Monday, March 08, 2010 - 04:09 pm: ||
I ended up with a FI tank and put it on my carbed M2. I was able to use the petcock from the M2 and put it in the "upper hole' because it was too tall to go in the "lower" hole. I stopped over at a nearby autoparts store and got a rubber washer that the gas will not eat through and a bolt and washer to plug the lower hole. It's hasn't leaked in 4 years but every winter I pull it off and replace the washer. Hope this helps and is cheaper than buying another tank.