G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Buell Forum » XBoard » Buell XBoard Archives » Archive through March 10, 2007 » Cracked swingarm/oil tank on brand new XB12Ss? « Previous Next »

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

Delk
Posted on Tuesday, March 06, 2007 - 08:02 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Hey y'all. Just got a brand new 07 XB12Ss Lighting Long. Aside from the first few rough starts it's been running great and a blast to ride. I've put about 200 miles on the new ride carefully following the break-in procedure.

Then came yesterday.

After riding home from work and parking said bike in the garage I noticed that oil was leaking from the back of the swingarm, dripping onto the exhaust tip, and leaving a nice brown/golden puddle on my floor.

Checking the oil hoses didn't divulge the culprit so I guessed it might just be the drain plug, and perhaps oil on the swingarm was kicked up from the tire (Hell...who knows?). So, today I removed the plug/oil, installed a new O-ring, refilled with Harley Oil (yeah, I know what you're thinking) and went for a ride after warming her up.

Guess what? She's still leaking oil. It appears that there is a small crack in the weld that goes right done the middle of the swingarm just in front of the rear tire. Luckily that warranty thing is still in play, but has anyone heard or experience the like?

CURSES!!!!

- delk
Top of pagePrevious messageNext messageBottom of page Link to this message

Tiburondriver47
Posted on Tuesday, March 06, 2007 - 08:23 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Had to have mine replaced on my 06 XB12R after 7,000 miles. Sounds like the same location. New one hasn't leaked so far. I don't think it is a common problem.
Top of pagePrevious messageNext messageBottom of page Link to this message

Ironhead1977
Posted on Tuesday, March 06, 2007 - 09:28 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

I have almost 2000 miles and not a single issue except I had to tighten up my kickstand pivot bolt, but that is just general service.
Top of pagePrevious messageNext messageBottom of page Link to this message

Olinxb12r
Posted on Wednesday, March 07, 2007 - 10:09 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

13,000 miles on my 04 without a single drop of oil leaked yet. Kind of makes me wonder if it is really a Harley engine or not. Of course the 04 has a different swingarm than the 07. Maybe it is a quality control issue in the new shop that is making the swingarms in Italy (I think that is right).
Top of pagePrevious messageNext messageBottom of page Link to this message

Swordsman
Posted on Wednesday, March 07, 2007 - 10:22 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Didn't someone else have the same problem with a new swingarm several months back? Someone other than Tib?

~SM
Top of pagePrevious messageNext messageBottom of page Link to this message

Court
Posted on Wednesday, March 07, 2007 - 10:24 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Most unusual. Contact your dealer. It'll be fixed pronto.
Top of pagePrevious messageNext messageBottom of page Link to this message

Ducxl
Posted on Wednesday, March 07, 2007 - 10:47 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Chinese swingarms........'06 an later..Italian swingarms, '05 and earlier.
Cheap Chinese crap
Top of pagePrevious messageNext messageBottom of page Link to this message

Josh_cox
Posted on Wednesday, March 07, 2007 - 11:00 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

I'd talk to your dealer. This is something that Buell will warranty.

Josh
Top of pagePrevious messageNext messageBottom of page Link to this message

Luxor
Posted on Wednesday, March 07, 2007 - 11:31 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

QUOTE: Ducxl -Chinese swingarms........'06 an later..Italian swingarms, '05 and earlier.
Cheap Chinese crap

UUMM, I believe you have it backwards All my Alu seems to be Brembo. I may be wrong here but isn't Brembo European?

I have both 03 and 04 S models, and have never had a single drop of oil from either. Even got rear-ended on the 03 in the swingarm on the right side(long story)still NO leaks EVER.
Top of pagePrevious messageNext messageBottom of page Link to this message

Ducxl
Posted on Wednesday, March 07, 2007 - 11:37 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Ummm,no....first generation swingarms were sourced from Brembo in Italy.The second generation swingarms are sourced from China,i think a Japanese subsidiary of Enkei.'05& earlier=Italy..'06&later=China.
Top of pagePrevious messageNext messageBottom of page Link to this message

Luxor
Posted on Wednesday, March 07, 2007 - 11:46 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Ducxl,

Sorry, I must not be awake yet. I re-read your post and noticed that your years were correct. I transposed in my head : ): )

Anyhoo, you can see the design change in the later models.
Top of pagePrevious messageNext messageBottom of page Link to this message

Anonymous
Posted on Wednesday, March 07, 2007 - 02:06 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Uly swingarms are not made in China; try Japan instead. They are made from a very advanced die casting technique that makes a superior swingarm to the earlier Italian-made ones. Buell looks all over the US and the world for the best part suppliers.
Top of pagePrevious messageNext messageBottom of page Link to this message

Deflaytedwayz2
Posted on Wednesday, March 07, 2007 - 07:51 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

mine was the one that broke a while ago. i had around 2000 on my bike as well. im at 5000 now with the now one. so far no more issues.
Top of pagePrevious messageNext messageBottom of page Link to this message

Ds_tiger
Posted on Wednesday, March 07, 2007 - 10:56 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Hey

I am the Chineeseee
dood that you all hate for making your Imperialistic motorcycles with flaws

HAHAHA

I will take over the world- you will rue the day you refer to my handi work and "cheap Chinees crap"- Just like you ridiculed that Jap bastard "Honda" for all his cheap crap

HAHAHAHA

cheep crap!If you so snobish about quality buy 20 thousand dollar BMW

HAHAHAH

Get over it


HAHAHAA

Top of pagePrevious messageNext messageBottom of page Link to this message

Goozyman
Posted on Thursday, March 08, 2007 - 08:06 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

how did i know this would turn into a racist BS thread?
Top of pagePrevious messageNext messageBottom of page Link to this message

45_degrees
Posted on Thursday, March 08, 2007 - 11:57 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Anonymous... are the shorter swingarms made in Japan too or only the Uly (and Long)? Just wondering.
Top of pagePrevious messageNext messageBottom of page Link to this message

Nasty73z
Posted on Thursday, March 08, 2007 - 12:16 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

I believe he was referring to the all the redesigned models, when the dipstick was moved and several other changes were made. This would apply to all 2006+ models.
Top of pagePrevious messageNext messageBottom of page Link to this message

Tiburondriver47
Posted on Thursday, March 08, 2007 - 06:38 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

The leak on mine was coming from the weld in the middle of the swing arm on the tire side about half way up. Probably a pin hole in the weld.
Top of pagePrevious messageNext messageBottom of page Link to this message

Delk
Posted on Thursday, March 08, 2007 - 08:52 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Tiburondriver47...that's EXACTLY where mine is leaking from too. I just wanted to thank everyone for the followup. The dealer told me to seal the leak with some silacone caulk so that I can ride it until the new swingarm shows up at the dealership. At least its covered under the warranty.
« Previous Next »

Add Your Message Here
Post:
Bold text Italics Underline Create a hyperlink Insert a clipart image

Username: Posting Information:
This is a public posting area. Enter your username and password if you have an account. Otherwise, enter your full name as your username and leave the password blank. Your e-mail address is optional.
Password:
E-mail:
Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.)
Enable HTML code in message
Automatically activate URLs in message
Action:

Topics | Last Day | Tree View | Search | User List | Help/Instructions | Rules | Program Credits Administration