G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Buell Forum » XBoard » Front fork height in triple trees? « Previous Next »

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

Xbullet
Posted on Sunday, December 06, 2020 - 12:43 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

What’s the stock height for the tubes themselves? How many lines showing above the top triple tree?
2007 XB9R

I’ve searched. I’ve googled. I don’t have a service manual handy. I’ve found all the other stock settings and aggressive handling settings by weight (and I’ll gladly share them). But nowhere does anyone talk about fork height in the trees...
Top of pagePrevious messageNext messageBottom of page Link to this message

Tpehak
Posted on Sunday, December 06, 2020 - 12:51 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Fork height is fixed and not adjustable, there is a metal o-ring in the groove on the fork tube is hard stopped by the step in the top tree bracket when you slide the tube inside the top tree bracket. When you slide the tube into the tree bracket you have to make sure you slide it all way in up to the hard stop.

You can download service manual here https://www.buellmods.com



Here is size for 2009 Buell XB for reference. 2007 might differ.




(Message edited by TPEHAK on December 06, 2020)
Top of pagePrevious messageNext messageBottom of page Link to this message

Xbullet
Posted on Sunday, December 06, 2020 - 02:24 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Thanks a million!
Top of pagePrevious messageNext messageBottom of page Link to this message

1_mike
Posted on Tuesday, December 08, 2020 - 06:42 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Then how come I was able to drop my forks a bit..?
As I recall, I dropped them in my bike .25".

It's very easy to remove the metal "o-ring", and put the forks where ever you want them.

Mike
Top of pagePrevious messageNext messageBottom of page Link to this message

Tpehak
Posted on Wednesday, December 09, 2020 - 01:00 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

It is not safe to remove the o-ring because of the fork tube can slide in some cases. That o-ring prevents such accident.

There is also a chance you will not align properly the left and right tubes height without the o-rings if you rely on something else instead of the machined step inside of the top tree bracket. The top face of the top tree for instance can not be used as datum plane for alignment of the tubes because of it is cast powder coated surface, not machined, left and right sides of the top tree bracket can differ significantly, and as result left and right tubes will have different height and will cause front wheel bearing wear and drag, front fork binding and wear, handling issues, etc.

(Message edited by TPEHAK on December 09, 2020)
Top of pagePrevious messageNext messageBottom of page Link to this message

Skipbarberman
Posted on Wednesday, December 09, 2020 - 08:51 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Tpehak - I would say 'recommended', not required. The rest of the motorcycle world has provisions for this; installing the axle and squaring before tightening/torquing the triple clamps. The snap rings simply make this an easier process, creating a 'stop point' for fork tube insertion into the top clamp. There are no such provisions for the bottom clamp of the triple tree, and without proper torque on the steering stem prior to installation of the forks, that too could cause the binding you refer to. There are specific steps that need to be taken in specific order, in assembling a front end that are universal in motorcycle repair.
Top of pagePrevious messageNext messageBottom of page Link to this message

Shoggin
Posted on Wednesday, December 09, 2020 - 11:07 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Exactly what he said ^^^^^
Top of pagePrevious messageNext messageBottom of page Link to this message

Tpehak
Posted on Wednesday, December 09, 2020 - 01:15 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

That's obsolete unsafe technique, Buell invented the best way of attaching front fork.
Top of pagePrevious messageNext messageBottom of page Link to this message

_buelligan_
Posted on Wednesday, December 09, 2020 - 02:20 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Wait! Shut the front door, Tpehak just complemented something about Buell!
Top of pagePrevious messageNext messageBottom of page Link to this message

Shoggin
Posted on Wednesday, December 09, 2020 - 11:28 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

I don't think Buell invented that particular cost cutting MFG technique. But hey, I've been wrong before...
Top of pagePrevious messageNext messageBottom of page Link to this message

Phelan
Posted on Friday, December 11, 2020 - 11:14 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Many manufacturers, including Buell, put compression dampening adjustment in one fork and rebound dampening in the other. Harley even put cartridge internals in one fork and damper rod internals in the other, on some of the touring models. Meaning the triple trees and axle sufficiently equalize offset forces between the separate forks. In other words, if you can't see a difference in fork height, you probably won't feel it either.
Top of pagePrevious messageNext messageBottom of page Link to this message

Shoggin
Posted on Friday, December 11, 2020 - 11:13 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

I wouldn't think you'd feel that small a difference in springs or pre-load either.
« Previous Next »

Add Your Message Here
Post:
Bold text Italics Underline Create a hyperlink Insert a clipart image

Username: Posting Information:
This is a public posting area. Enter your username and password if you have an account. Otherwise, enter your full name as your username and leave the password blank. Your e-mail address is optional.
Password:
E-mail:
Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.)
Enable HTML code in message
Automatically activate URLs in message
Action:

Topics | Last Day | Tree View | Search | User List | Help/Instructions | Rules | Program Credits Administration