G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Buell Forum » XBoard » Archive through August 23, 2017 » New to me '07 XB12r .. anything i should know? « Previous Next »

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

Slydogjeff77
Posted on Sunday, May 21, 2017 - 09:42 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Hey Guys,
New to Buell and this is my first Sports bike. Last bike was a custom 1980 Honda GL1100 Goldwing that I built. This is a whole new animal. A few more CC, 150 lb lighter and basically no limit on the top end! SO..

I've been in a world of naturally aspirated carbonated opposable 4 cylinder engines for the past 6 years.

What good advice can you give me right off the bat!?

Some things I've noticed so far is that it looks like there is some oil coming from the rear cylinder head? Head gasket maybe?

Also the breather filter from the airbox is missing and the hose is just dangling down in front. Looks like the air filter hasn't been changed in a while.

Everything else looks great. Clean title, new inspection, tires are new, Oil changed prior to purchase. sounds great. runs great. Feels great. 15000 miles on it.

I saw something about adjusting the suspension for my stats? I can't put my feet flat and i'd like to lower it. Is that possible?



Top of pagePrevious messageNext messageBottom of page Link to this message

Slydogjeff77
Posted on Sunday, May 21, 2017 - 09:47 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Also, what should i know about onboard computer? is there one? its fuel injected so there has to be right?

is it programmable?
Is there an standard read port like fords or something?!

I'm prob getting way ahead of myself.
here is where i'm coming from if anyway cares..

https://www.ngwclub.com/forum/viewtopic.php?p=5876 55#p587655
Top of pagePrevious messageNext messageBottom of page Link to this message

Audiowize
Posted on Sunday, May 21, 2017 - 10:28 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

I have a 77 GL1000 in the garage that lives next to my XB. Carb work on the GL1000 is a nightmare, if you've worked through Randakk's kit, you won't be too intimidated by much on this bike.

The oil you're seeing is likely due to a leaky rocker box cover. You can search for how to rotate the engine in the frame, then it's pretty easy to replace the gaskets.

These have a computer on board that takes care of fuel injection. You can buy a Bluetooth dongle online and download Ecmdroid on your phone and you'll have a powerful tool for diagnostics and loading maps.

XB's have a timing adjustment that will look familiar, but without the second movable plate.

You'll find information about suspension tuning in the service manual, I'd buy a copy.

When you do the rocker boxes, yank that header off and have it ceramic coated. It looks like someone had it wrapped, and for $150 it can look like new.
Top of pagePrevious messageNext messageBottom of page Link to this message

Froggy
Posted on Monday, May 22, 2017 - 09:02 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)


quote:

What good advice can you give me right off the bat!?





Check the "77" connector. It is located under that black plastic front pulley cover, it is a two pin connector. This connector attaches the voltage regulator to the battery, and is a known weak spot on 03-07s. The pins don't make good contact, and eventually it arcs and melts the connector, and then your battery stops charging. Simply inspect the connector, if it looks fine don't worry about it, if it looks melted, you can replace it. Harley has an upgraded connector kit, or you can just splice on some marine grade connectors.



Top of pagePrevious messageNext messageBottom of page Link to this message

Gimpster
Posted on Monday, May 22, 2017 - 11:21 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Would recommend buying a Buelltooth (google it, website also has many FAQ's to your questions about what is/isn't possible) or old school USB ECMSpy cable... I have both.

Resetting the TPS is routine maintenance on these motorcycles for example, and is done with ECMspy or ECMdroid.

Only advice I have is same for any used motorcycle. Check it over carefully, assume the previous owner did zero maint. IE: primary tension, fluid... yada yada. Look at the belt closely too, the pics not close up but am I seeing your belt fray a bit?

I had been out of the Buell game for 7 years and bought my '04 XB12R with only 4200 miles...... it still had, what appeared to be, the factory oil filter on it.
« Previous Next »

Add Your Message Here
Post:
Bold text Italics Underline Create a hyperlink Insert a clipart image

Username: Posting Information:
This is a public posting area. Enter your username and password if you have an account. Otherwise, enter your full name as your username and leave the password blank. Your e-mail address is optional.
Password:
E-mail:
Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.)
Enable HTML code in message
Automatically activate URLs in message
Action:

Topics | Last Day | Tree View | Search | User List | Help/Instructions | Rules | Program Credits Administration