G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   Sugarmcguinnmsncom Posted on Saturday, October 12, 2013 - 07:32 pm:        I've been searching all over for this... Here (Knowledge Vault), there (inter-webs), the service manual... No dice... I read somewhere that it was 8.3, but the thread seemed unsure, at best... Anyone have a definitive answer on this? Thanks.   Ericz Posted on Sunday, October 13, 2013 - 06:01 pm:        Wheel valve stem or cylinder head valve stem? Cylinder head valve stems are 7mm. I have a wheel valve stem I could measure if you need. (Message edited by EricZ on October 13, 2013)   Sugarmcguinnmsncom Posted on Sunday, October 13, 2013 - 07:46 pm:        Sorry, my bad... Wheel Valve stem. I actually went out and threw a caliper on the wheel... It is in fact 8.3mm. Any idea on the proper length?

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a public posting area. Enter your username and password if you have an account. Otherwise, enter your full name as your username and leave the password blank. Your e-mail address is optional. Password: E-mail: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: