G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   Prichmon Posted on Wednesday, September 04, 2013 - 08:19 pm:        I'm not real happy with the way the bike runs on the bottom with the Jardine. So I decided to pull the jardine off my STT and I ran into a couple problems. My front band clamp is missing and the rear aluminum bracket is contacting an oil line. Is the oil line supposed to pass through the aluminum bracket. It's BEEN A LONG TIME since I had an XB exhaust system apart... Is there any local place to get the front band clamp such as Napa? How long is it supposed to be? Thanks Rich   Loser54023 Posted on Wednesday, September 04, 2013 - 09:28 pm:        if i remember right it does run thru the mounting bracket.   D_adams Posted on Wednesday, September 04, 2013 - 09:50 pm:        EBR typically has the band clamps in stock, $9 each.   Sifo Posted on Wednesday, September 04, 2013 - 11:40 pm:        Yes the oil line runs through the bracket. Easiest to just unscrew it from the swing arm. I used some pipe joint sealant when I put it back together (not silicone tape).

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a public posting area. Enter your username and password if you have an account. Otherwise, enter your full name as your username and leave the password blank. Your e-mail address is optional. Password: E-mail: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: