|Posted on Wednesday, September 04, 2013 - 08:19 pm: ||
I'm not real happy with the way the bike runs on the bottom with the Jardine. So I decided to pull the jardine off my STT and I ran into a couple problems.
My front band clamp is missing and the rear aluminum bracket is contacting an oil line. Is the oil line supposed to pass through the aluminum bracket.
It's BEEN A LONG TIME since I had an XB exhaust system apart...
Is there any local place to get the front band clamp such as Napa? How long is it supposed to be?
|Posted on Wednesday, September 04, 2013 - 09:28 pm: ||
if i remember right it does run thru the mounting bracket.
|Posted on Wednesday, September 04, 2013 - 09:50 pm: ||
EBR typically has the band clamps in stock, $9 each.
|Posted on Wednesday, September 04, 2013 - 11:40 pm: ||
Yes the oil line runs through the bracket. Easiest to just unscrew it from the swing arm. I used some pipe joint sealant when I put it back together (not silicone tape).