G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Buell Forum » XBoard » Archive through April 23, 2013 » XR-1 Flattracker, Bottpower « Previous Next »

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

1972rvbb
Posted on Saturday, December 15, 2012 - 12:38 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Hi everybody, after several months working hard on the project, finally we can show the final pictures.

You all ready know that the idea came from the enthusiasm about flattrack bikes and the aim of having a FT style bike for street use. The objective was a fun, light and powerful bike. Here we have 100hp and 160 kg.

All the engineering was done by David from Bootpower, including parts design and production. We used a Torque Hammer which is smaller, lighter and improves the engine performance a little bit. Both the chassis and the subframe have been clear coated in such a way that you can see the welding cordons. Besides the silencer, the front fork and 8 pistons brake caliper are from a Buell 1125. Front master cylinder and clutch lever are from ISR (including the push buttons). The bike has a Motogadget display, and an Easton handlebar. Rear shock is an Öhlins from the Buell 1125 race kit. It has several special designed carbon parts. Finally our friends from Solobuell and Kiddomotors helped us with some parts. I hope you enjoy it!

Here you can also follow the process and get more information:

http://bottpower.com/eng/?p=440

http://www.facebook.com/pages/Bottpower-Project/117279678290426


1


2


3


4


6


8


9


10


11


7


5


Best regards,

Ramon

(Message edited by 1972rvbb on December 15, 2012)
Top of pagePrevious messageNext messageBottom of page Link to this message

Glitch
Posted on Saturday, December 15, 2012 - 01:30 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Do want!
Top of pagePrevious messageNext messageBottom of page Link to this message

Firemanjim
Posted on Saturday, December 15, 2012 - 02:34 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

And fueled how? XB injection goes up?
Top of pagePrevious messageNext messageBottom of page Link to this message

Tony216
Posted on Saturday, December 15, 2012 - 07:00 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

I think I just filled the cup.
Top of pagePrevious messageNext messageBottom of page Link to this message

1972rvbb
Posted on Saturday, December 15, 2012 - 08:15 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Glitch, Tony, I'm glad you like it!

Firemanjin, we are using the same XB injection, we just rotated the throttlebody and did some parts to make it work that way.

Ramon.
Top of pagePrevious messageNext messageBottom of page Link to this message

Nine
Posted on Saturday, December 15, 2012 - 09:56 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

hello....that's a great looking bike,how does it handle without the front engine tie-bar.
Top of pagePrevious messageNext messageBottom of page Link to this message

Frinzo
Posted on Saturday, December 15, 2012 - 11:16 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Sexy, glad to see if finally together.
Top of pagePrevious messageNext messageBottom of page Link to this message

Kdogshirow
Posted on Sunday, December 16, 2012 - 12:04 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Pretty cool looking , very Cafe Racer like .
Top of pagePrevious messageNext messageBottom of page Link to this message

Firstbuell
Posted on Sunday, December 16, 2012 - 12:05 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

wow!

thx for posting
Top of pagePrevious messageNext messageBottom of page Link to this message

Bigdaddy
Posted on Sunday, December 16, 2012 - 08:42 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

That's as close to Timbo's sporty as anything I've seen in the last 5 years.

Beautiful work.
Top of pagePrevious messageNext messageBottom of page Link to this message

Glitch
Posted on Sunday, December 16, 2012 - 09:10 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

374 POUNDS!
And man does that thing look tiny.
Can you post a picture with someone on it so we can get a good sense of the size.
Man alive I could tear up some twisties on that!
http://hellforleathermagazine.com/2012/12/custom-b ott-xr-1/
Top of pagePrevious messageNext messageBottom of page Link to this message

Murderface
Posted on Sunday, December 16, 2012 - 01:43 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

That looks amazing. Post up when the kits become available. I will find a wrecked XB to transform.
Top of pagePrevious messageNext messageBottom of page Link to this message

Firstbuell
Posted on Sunday, December 16, 2012 - 02:15 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

RE: size -

Buell forks, wheels, engine & swing arm = similar wheelbase? [or at least, add-it-up simplicity]

also EZ to visually compare crankshaft centerlines to axle lines for engine heights & front-to-back positioning

axle lines also assist in estimating any seat height difference
Top of pagePrevious messageNext messageBottom of page Link to this message

Firstbuell
Posted on Sunday, December 16, 2012 - 02:40 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

hey Murderface,

I fell asleep last night dreaming of this kit - built to the max

so your post sparked me to post a possible spec - the basic idea is to take BOTTpower at their word about their own parts list & 'improve' it:

1190RS race mag wheels & brakes
1190RS Big Piston forks & shok
XB9 mill with 1250 kit
American Sport Bike comparison-best XB exhaust system

finally, my preference is to maintain belt drive if possible [a salute to air-cooleds' lo-maintenance aspect]

all the little details remain that, for now....

(Message edited by firstbuell on December 16, 2012)
Top of pagePrevious messageNext messageBottom of page Link to this message

Murderface
Posted on Sunday, December 16, 2012 - 03:12 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Curt,

You do have some nice improvements there. I am undecided about keeping the buell brakes though and would like to swap in dual brembo front brakes. The backbone frame bottpower makes looks simple enough that if i bought new dies for my tube bender i could possibly make it, eventually... i like the ability to keep the belt drive for the K.I.S.S. principal.
Top of pagePrevious messageNext messageBottom of page Link to this message

1972rvbb
Posted on Sunday, February 17, 2013 - 03:10 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Hi again!

On the 31 of January we tested the XR1 for the very first time. For this test we chose a karting track in Albaida (a small town in the East of Spain), because unlike most karting track, this one is not very slow and it has some fast sections. Several world championship riders come here to practice supermoto.
We were very lucky with the weather; we had a sunny day, without any wind and with a spring-like temperature. I rode the bike together with Alex Martinez, a rider with a lot of experience both in Motocross and road racing. Alex raced World Superstock in 2005 and 2006 (this year he was Kawasaki Italy official rider). Two years ago he also was the first one to test Bottpower moto2 bike. We had more people in Albaida. The guys from “Agarra Aire” came to film a short video. Also photographer Kristina Fender came to shoot for Sideburn magazine, which are preparing an article about the XR1.
I was the first to ride the bike, 2 laps slowly, just to check that everything was ok. After it, I went back to the track and after 2 laps more the knee sliders were touching the asphalt. Good signal!. I didn’t stop lapping, increasing his pace lap by lap. David, had to stop me for lunch. While riding the bike, you easily notice the helpful riding position. The bike geometries, the rake and weight, let you forget about the engine 1.200cc size. You place it wherever you wish, in a quite easy way. The XR-1 is extremely compact, the frame structure and rigidity favor an instinctive turn in. You can face the apex aggressively, but knowing that you can go even further. The engine seems to be built for this bike. You constantly feel its torque, however easily guided by your right hand. This also shows the great job done on the electronics. This test has exceeded my expectations and the objectives pursued.
After me, Alex rode the bike. He did it in a fast and aggressive way from the very beginning. The tires were screaming in every turn, and in some of them he was going into the corner quite sideways, in a supermoto style. At the chicane exit his front wheel was always on the air. It was a funny show!
We are very satisfied about how this first test came out. We checked that the bike performs really well on this kind of track. We were lapping the whole day and we didn’t have any kind of problem. We did the next test in Cheste (MotoGP track in Valencia, Spain), to check how the XR1 performs on really fast corners. David is already preparing a post with pictures and information. Coming soon!

http://bottpower.com/eng/?p=470
http://www.facebook.com/pages/Bottpower-Project/117279678290426


1


2


3


6


7


9
Top of pagePrevious messageNext messageBottom of page Link to this message

1972rvbb
Posted on Monday, February 18, 2013 - 12:29 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

I add the link to the previous post for those who are interested:

http://www.badweatherbikers.com/buell/messages/327 77/630085.html

See you
Top of pagePrevious messageNext messageBottom of page Link to this message

Skully
Posted on Monday, February 18, 2013 - 11:40 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

WOW!! You guys have put a lot of work into this is bike and it shows! Nice job.
Top of pagePrevious messageNext messageBottom of page Link to this message

Brumbear
Posted on Tuesday, February 19, 2013 - 01:50 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Well done and best of luck with it. Hope to see it at the European Buell meeting next year in Southern Germany if either or hopefully both of us make it there!!!!!!!!!!!!!!!!!!!!
Top of pagePrevious messageNext messageBottom of page Link to this message

1972rvbb
Posted on Saturday, March 02, 2013 - 12:40 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

We finally have the video of the test. I hope you like it!

http://youtu.be/hPzY7D4yjqQ
Top of pagePrevious messageNext messageBottom of page Link to this message

Panhead_dan
Posted on Saturday, March 02, 2013 - 02:01 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

AMAZING!
Congratulations on a first class job on this machine.
Please keep us updated.
Top of pagePrevious messageNext messageBottom of page Link to this message

1972rvbb
Posted on Monday, March 04, 2013 - 06:07 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

I do not mean to bore you with more pictures. Here we have some new pics from the second XR1 test in Valencia Circuit Cheste, with the australian Moto GP / Moto2 rider Anthony West. Just after the official World Championchip training a couple of weeks ago. Thanks to David and Jose, who are also engineers from WC teams and would organize the event with Dorna, Irta, West... I leave a copy&paste from his post:

"Last 14th of February we took profit that all the World Championship Moto2 and Moto3 teams were testing in Valencia (they spent 3 days training there) to organize a small test with Anthony West riding the BOTT XR1 in Cheste circuit. We arranged the test at 5 in the afternoon, once the official IRTA tests were finished. We rented the track for half hour, it wasn’t possible to rent it for more time because there was not enough sunlight. Of course with such a short test the objective was not to break the lap record, or to push the XR1 to the limit. We just wanted Anthony to ride some laps and give us his opinion about the bike behavior. Anthony made two runs of 5 laps each one. The bike worked perfect again and we didn’t have any problem. Anthony’s comments about the bike were very good, so we went back home very happy one more time. We want to thank Anthony West for testing the BOTT XR1 (he also tested our moto2 bike some time ago). Also to the QMMF (Qatar Motor and Motorcycle Federation) Team for allowing West to ride our bike. To the track for allowing us to lap once the IRTA tests were finished. To Jaime Olivares for taking these cool action photos. And to Ramon for allowing Anthony to ride his beloved bike (and also for all his help, ideas and for his collaboration in this project helping us to making the XR1 come true). In Cheste we had also the guys from Agarra Aire filming again, so in a few weeks we will have another video in which we will give more information about this test, and we will listen Anthony feelings just when he get off the bike."


1



2



4



5



6



3



7



8



9
Top of pagePrevious messageNext messageBottom of page Link to this message

Rotor
Posted on Wednesday, March 13, 2013 - 02:40 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

how much for the parts kit ?
Top of pagePrevious messageNext messageBottom of page Link to this message

1972rvbb
Posted on Saturday, March 16, 2013 - 03:33 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

In our first test in Albaida circuit, the people from the renown Sideburn magazine, came for a photoshoot done by Kristina Fender, a specialist photographer for stylish motorbikes. Sideburn is the 'bible' for custom flattracker builders, with unique articles.

I hope you recognize this bike

http://sideburnmag.blogspot.com.es/2013/03/bottpower-xr-1.html


Xr1side


This is the blog of the magazine:

http://sideburnmag.blogspot.com.es/
« Previous Next »

Add Your Message Here
Post:
Bold text Italics Underline Create a hyperlink Insert a clipart image

Username: Posting Information:
This is a public posting area. Enter your username and password if you have an account. Otherwise, enter your full name as your username and leave the password blank. Your e-mail address is optional.
Password:
E-mail:
Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.)
Enable HTML code in message
Automatically activate URLs in message
Action:

Topics | Last Day | Tree View | Search | User List | Help/Instructions | Rules | Program Credits Administration