G oog le Buell 1125R Forum | Login/out | Topics | Search | Custodians | Register | Edit Profile


Buell Forum » 1125R Superbike Board » Archive through June 27, 2020 » Looking at possibly buying an 1125 HELP « Previous Next »

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

Blackbelt
Posted on Thursday, June 27, 2019 - 06:11 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

ok Fellow Badwebbers... i have owned a couple tubers and an XB. Possibly looking to get an 1125....

Anything i should look out for? which is better R or CR? come on people help a brotha out
Top of pagePrevious messageNext messageBottom of page Link to this message

Xbuell12s
Posted on Thursday, June 27, 2019 - 06:23 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Depends on what you want. CR is more upright like a lightning, R is more leaned over like a Firebolt. Styling is different and the CR has a longer swinging and a 76 tooth on the rear instead of a 70. Both very fun bikes in their own rights. 08s were more reliable for charging systems but all were susceptible to clutch sweep. Redoing charging system could be around $800 in parts, clutch is around $200 in parts. I have a CR for street shenanigans but I also take it on trips because it is comfortable. I have an R that I'm going to setup for the track. Damn they are fast and I love the sound. I have a Jardine on my CR and love it.
Top of pagePrevious messageNext messageBottom of page Link to this message

Blackbelt
Posted on Thursday, June 27, 2019 - 06:56 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Cool... the one i am looking at is a 2009 CR... has 5,000 miles and asking $4000...

kind of nice... has a Jardine on it as well...He said there is some fading on the front brakes so he replaced the pads with "HH" pads? could the rotor be warped?
Top of pagePrevious messageNext messageBottom of page Link to this message

Xbuell12s
Posted on Thursday, June 27, 2019 - 07:37 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

I'd ask about the charging system and the clutch. They likely haven't been changed. You should use that in your negotiations.
Top of pagePrevious messageNext messageBottom of page Link to this message

Chameleon
Posted on Thursday, June 27, 2019 - 08:00 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)


quote:

He said there is some fading on the front brakes so he replaced the pads with "HH" pads? could the rotor be warped?



More likely that the brakes haven't been used hard enough.

I've experienced both fading and a feeling of a warped front rotor on both my 2008 & 2009 1125R... In all cases it was due to my having not used the brakes hard enough and deposits building up.

When I realized this and really put some heat into my front brake a few times, the feeling was significantly (90%+) diminished.
Top of pagePrevious messageNext messageBottom of page Link to this message

Froggy
Posted on Thursday, June 27, 2019 - 08:34 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Front brake situation is basically the same as on the XBs. Warping is extremely rare, "pulsing" is due to brake dust build up on the rotor and mounting hardware. Brake fade shouldn't be happening on the street, but maybe you are really buying a bike from Shawn Higbee then. Different pads help with the feel as the stock ones are a bit wooden, I run the EBC HHs on most of my bikes now.

4K sounds good if the charging system was already properly taken care of (EBR modified rotor), otherwise knock off a grand.
Top of pagePrevious messageNext messageBottom of page Link to this message

Fresnobuell
Posted on Friday, June 28, 2019 - 01:11 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Just get it. I like mine more after 10 years if that's possible.
Top of pagePrevious messageNext messageBottom of page Link to this message

Xbpete
Posted on Friday, June 28, 2019 - 06:28 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Look out for the biggest grin ever when she power wheelies and finding a totally new dimension of performance over 7,500 RPM. Still have my 12R but think she will now sit... the CR is imho the finest motorcycle I have ridden in 54 years up on two.... just do it!!! lol
Top of pagePrevious messageNext messageBottom of page Link to this message

Fresnobuell
Posted on Friday, June 28, 2019 - 11:00 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

I had an Xb9SX prior to purchasing the 1125R and I sold my XB a few months after acquiring the 1125R. The power and refined feeling of the water cooled motor was my preference. There maybe some niggles with these 1125 bikes, but the Helicon is the crown jewel. It's just fantastic to wring it's neck and it keep coming back for more!
Top of pagePrevious messageNext messageBottom of page Link to this message

Fresnobuell
Posted on Friday, June 28, 2019 - 11:03 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

PS on the front brake issue, I have the finned rotor and EBC HH pads. It takes some time to get those things heated up properly, but when they do look out. I find myself over brakinng easily and could run it quite bit deeper in corners if I chose to hang it out there more...but on the street I like to have a margin of error, plus blind corners kind of freak me out in my old age.
Top of pagePrevious messageNext messageBottom of page Link to this message

Ratbuell
Posted on Monday, July 01, 2019 - 10:05 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Get it.

I have about 10k on my CR. Started adding aux lights up front last spring...hit a deer on my S2...didn't ride much at all last year...got sick of looking at the CR tonight, finished the work, reassembled, took for a spin to the gas station to make sure it was full since all the meters had reset.

Holy CRAP.

I forgot how damned potent those bikes are.

CR is lower gearing than R - I like it a LOT better for street / real-world use. The R always felt (to me) like it needed a downshift. The CR seems to always be in the right gear, rarin' to go, RIGHT NOW.

I had the charging system relay recall done years ago, and haven't had an issue since. KEEP THE REVS UP. Forget the numbers on the dial - put the needle in the middle of the rev range and keep it there. This is not a 3,000 RPM bike, it likes to REV.

Comfort-wise, I'm 6'4" with a 34" inseam. HATED the stock ergos. Put on a Buell Select seat (1" taller), and a set of black Ulysses pegs (1" lower), kept the clubmans...and I've done 900 mile days no problem.

If I had self control...I'd ride it more. But I need to keep it to a rare-ride status - if I get used to the power and the capabilities...I push it. Harder and harder. And it will easily do things that shouldn't be done on public roads.
Top of pagePrevious messageNext messageBottom of page Link to this message

Fresnobuell
Posted on Tuesday, July 02, 2019 - 05:04 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

I wouldn't mind putting CR gearing on my R, but its too involved unfortunately.
Top of pagePrevious messageNext messageBottom of page Link to this message

Shoggin
Posted on Tuesday, July 02, 2019 - 07:36 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Really?
Is it more than just a sprocket and belt?
The idler and front pulley are the same, is the swing arm different?
Top of pagePrevious messageNext messageBottom of page Link to this message

Joe7bros
Posted on Tuesday, July 02, 2019 - 08:14 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Blackbelt, The charging issue should be checked and resolved if not already taken care of. If the Harley fix is still in place, I would say charging system is suspect; same goes for the lousy Ducati shunt regulator. There is a procedure to test the stator; do that first. You need to check for in-range voltage and continuity. If the stator checks out but it still has the original voltage regulator, replace that with a Shindengen series V/R from Rick's; there are a couple of different opinions, but I have found that if the stator is functioning correctly, upgrading the V/R to a series versus shunt regulator will resolve charging issues; and whether you choose to install a modified rotor or not, you still need to do the V/R
Top of pagePrevious messageNext messageBottom of page Link to this message

Fresnobuell
Posted on Tuesday, July 02, 2019 - 09:14 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)


quote:

The idler and front pulley are the same, is the swing arm different?




Yep the swingarm is very slightly a different length...and also a CR swingarm colored midnight blue isn't available, so it would entail painting if I wanted the swingarm to match my '08 Midnight Blue R.
Top of pagePrevious messageNext messageBottom of page Link to this message

Shoggin
Posted on Wednesday, July 03, 2019 - 12:55 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Interesting! Never knew that...

I wonder why it's a different length? Very Un-Buell-like. Seems more likely Erik would re-use something already in the parts bin. LOL
Top of pagePrevious messageNext messageBottom of page Link to this message

Ratbuell
Posted on Wednesday, July 03, 2019 - 07:01 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

The wheelbase is unchanged IIRC, the change is to accommodate the larger CR rear pulley.

Same reason the Ulysses and Lightning Long used a different frame and swingarm than a standard Lightning or Firebolt. Make each model do its specific job the best it can.
Top of pagePrevious messageNext messageBottom of page Link to this message

Fresnobuell
Posted on Thursday, July 04, 2019 - 05:15 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

If I ever get my all black '09 R back on the road, I MIGHT do the CR conversion if I can find the parts cheap enough.

How does the change affect the speedo and gear shift indicator? if any?
« Previous Next »

Add Your Message Here
Post:
Bold text Italics Underline Create a hyperlink Insert a clipart image

Username: Posting Information:
This is a public posting area. Enter your username and password if you have an account. Otherwise, enter your full name as your username and leave the password blank. Your e-mail address is optional.
Password:
E-mail:
Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.)
Enable HTML code in message
Automatically activate URLs in message
Action:

Topics | Last Day | Tree View | Search | User List | Help/Instructions | Rules | Program Credits Administration