| Author | Message | ||
     Hybridmomentspass |
Does anyone know the dimensions for the motor? Mainly looking for info on height from bottom to top max width (side to side) and front to back - from the furthest point on the rear cylinder to front of front cylinder more project questions... | ||
| Panshovevo |
I should be able to get those for you sometime today. Got one sitting on a pallet, just a matter of finding the time to do it. | ||
| Hybridmomentspass |
Man that would be awesome! Im looking at different ideas I want to go the drag route, but I have other ideas too These measurements could help sway me one way or another (or, if I could build both and just swap engines between the two  ) | ||
| Panshovevo |
Looks like 25" high...to the top of the throttle bodies. Looks like 19" wide to me. Best I can guesstimate the length as specified is 22.5-23". At some point in the near future, I should be able to get more precise measurements. (Message edited by Panshovevo on May 01, 2017) | ||
| Hybridmomentspass |
19" at the widest point of the cases? Wouldnt have guessed it was that wide, but never thought about it. But the height is a great one to know, just trying to figure out some stuff. I'll post more as I figure stuff out, but I think you might dig the direction I go based on your handle on here |
