G oog le Buell 1125R Forum | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Kinder Posted on Saturday, January 30, 2016 - 11:00 pm:        So a while back I installed the EBR clutch actuator/ slave thing. Install was easy. I noticed though that my clutch lever pull was significantly heavier. Now I'm a big guy so it hadn't really bothered me, till now. Guess it's age but now long in city commutes (stop and go) are posing a problem. Any ideas as to why my lever pull got so much stiffer? I also noticed that shifts are harder (sometimes hard to find neural as well) but not sure if the two issues are related. I know it's an old thing but my buddy Google had not been able to help me find a solution. Thanks   Terrys1980 Posted on Sunday, January 31, 2016 - 07:24 am:        It's obvious the piston is not moving as it should. A pinched o-ring would be my first guess. Did you completely flush the old fluid out?   Pwillikers Posted on Tuesday, February 02, 2016 - 05:05 pm:        I agree with Terry. My EBR clutch slave didn't change the light lever feel of the stock setup. Sounds like it might be an assembly issue.   Kinder Posted on Friday, February 12, 2016 - 07:22 pm:        Did not fully flush old fluid out. Pinched o-ring... guess it's disassemble time again.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a public posting area. Enter your username and password if you have an account. Otherwise, enter your full name as your username and leave the password blank. Your e-mail address is optional. Password: E-mail: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: