G oog le Buell 1125R Forum | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Paulp1125cr Posted on Tuesday, June 30, 2015 - 02:24 pm:        So I removed the old stator (burnt to a crisp) I removed the connector to feed the wires out of the harness. My question is when I get the new stator how do I know what order the new wires go into the connector?   Froggy Posted on Tuesday, June 30, 2015 - 02:33 pm:        Best way is to label them before removing them from the connector, but if you are not running that relay harness that shuts off a leg, it does not matter which order they are. They are all AC voltage, and in the end they will make up three phases even if none of them are in the original hole.   Paulp1125cr Posted on Tuesday, June 30, 2015 - 02:40 pm:        Let's just say I'm an idiot and didn't Label thembut still have the harness then what?   Shawns Posted on Tuesday, June 30, 2015 - 06:58 pm:        Still shouldn't matter.   Pwillikers Posted on Wednesday, July 01, 2015 - 04:28 pm:        It doesn't matter. All three are electrically identical.   Sprintst Posted on Wednesday, July 01, 2015 - 08:21 pm:        Got pic of the roasted stator?

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a public posting area. Enter your username and password if you have an account. Otherwise, enter your full name as your username and leave the password blank. Your e-mail address is optional. Password: E-mail: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: