Author |
Message |
Ericz
| Posted on Tuesday, March 20, 2012 - 09:54 am: |
|
I am selling my clutch assembly from my 2005 XB12. I have upgraded it with Barnett carbon fiber plates and a Rivera/Primo Competition clutch spring. It is the most extreme setup you can install in the stock clutch basket/hub. I have about 4k miles on the plates and only about 2k on the spring. They are in great shape! $300 + shipping. Paypal only.
|
Buelleaver
| Posted on Saturday, March 24, 2012 - 01:24 am: |
|
will this fit a 2001 x1 ? some how a lug broke off my hub.. |
Ericz
| Posted on Saturday, March 24, 2012 - 08:49 pm: |
|
I installed a x1 style clutch in my XB, but I'm not too sure about the XB clutch fitting in a tube frame primary. It may not clear the primary cover. |
Foximus
| Posted on Sunday, March 25, 2012 - 09:48 am: |
|
You should have no problems, assuming its still a 9/8 clutch basket. |
Ericz
| Posted on Sunday, March 25, 2012 - 08:01 pm: |
|
The XB assembly uses a spacing washer behind the hub and the XL/Tuber clutch does not. You may be able to use the XB assembly with the spacing washer. I have a detailed writeup on my swap to the XL style clutch assembly on my website: http://streetfighterperformance.com/xb12-turbo/dri vetrain/clutch |
Ericz
| Posted on Tuesday, March 27, 2012 - 09:44 am: |
|
Going on ebay...http://www.ebay.com/itm/140731386707?item=140731386707&viewitem=&vxp=mtr (Message edited by EricZ on March 27, 2012) |
|