G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   Buellerxt Posted on Sunday, April 25, 2021 - 11:04 pm:        I know that the 2010 Ulysses's have the comfort kit and the three bearing rear wheel, are there any other differences from the 2008XT's like I had? I believe the X's wheels are heavier/stiffer too but I'm not sure. What are the differences between the X's and XT's besides the luggage and higher front fender? Thanks. (Message edited by buellerxt on April 25, 2021)   Tootal Posted on Sunday, April 25, 2021 - 11:17 pm:        Wheel's are stronger/heavier, more suspension travel/taller and two O2 sensors with different ecm.   Buellerxt Posted on Sunday, April 25, 2021 - 11:24 pm:        Thanks, Tootal. Have the two 02 sensors and different ecm proven to be better, make the bike more reliable, etc.? I did not follow the 10's. Do you know if the bikes feel different or ride differently if both are equipped with street tires? Thanks again.   Tootal Posted on Sunday, April 25, 2021 - 11:58 pm:        I've never ridden one nor do I know anybody that has a 10. I would assume that having two sensors makes the fueling a lot more accurate. I've learned though my Harley with a Thundermax Fuel system that the rear cylinder uses less fuel than the front. Since the older Uly's had the sensor in the rear they must have been adding a certain amount to the front Mathematically. Not exact science. I would have loved to ride a 10 to find out!   Buellerxt Posted on Monday, April 26, 2021 - 11:41 am:        Thanks, Tootal. I'm tempted but not having a tech to work on it, if needed, and the scarcity of parts has me holding off. We'll see.   Screamer Posted on Sunday, May 02, 2021 - 11:32 am:        I’d have to look to be sure, the first T models also had a few more comfort features (heated grips, tall windshield). I think (but I’m also not sure) that the 2008 and later Ulysses had the oblong throttle wheel instead of the circular wheel - like all previous XB models. Throttle response at lower T-body openings was different.   1313 Posted on Monday, May 03, 2021 - 01:03 pm:        From '08 Technical Forum:   Screamer Posted on Monday, May 03, 2021 - 01:26 pm:        Always enjoyed the legalese “twist sensitivity” phrase...   Tpehak Posted on Monday, May 03, 2021 - 02:05 pm:        They forgot to mention the crappy seals design has to be fixed https://www.buellxb.com/forum/showthread.php?53975 -High-performance-intake-manifold-flanges-for-2008 -2010-Buell-XB   Mark_weiss Posted on Tuesday, May 04, 2021 - 05:23 pm:        "Always enjoyed the legalese “twist sensitivity” phrase..." Now it's all done electronically.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: