| Author | Message | ||
     Jstav2012 |
Hi all, I have a stunt cage from Powerworx (I believe) and there used to be a list of mounting h/w floating around on the web, but I can't find it. it has threaded rod, some longer bolts, rubber pad, etc. Anybody know where this list is? | ||
| Nillaice |
I'm guessing you don't have instructions/packing list for them either... yeah, so you can just cut your own rubber pad. id get some DENSE 1/4" rubber pad (chunk of tire tread?) and hack it up with a utility knife. then get some (3/8 iirc) different lengths of bolts 4,5,6 etc" and coupler nuts so you dont snag your thigh id stack some washers in the front isolator cap head recesses and use grade 5 bolts to tag into the front jug. grade 8/12.9's are strongerer than the alum and will wreck the front jug if you actually ever use the cage. grade 5 bolts will shear but can be extracted. you can take a hole-saw your front scoop to clearance the front bar but the chin fairing is just easier to leave off. you only gotta drill or notch out the tail section a little. |
