Author |
Message |
Fubar
| Posted on Tuesday, June 27, 2006 - 02:32 pm: |
|
Although I had an existing Laminar Lip, I was not really happy with the performance at freeway speed or the tacked-on look. The wind hit me in the adam's apple and it filled the lower part of my face shield with bugs. I seized the opportunity to buy a "6 Over" windshield from a list member. It arrived as promised but found it did not have the pins installed. I called CB and to find out what they normally do. I spoke with their production manager, Roy Perez, and he said that they didn't advise using the screen. He offered to cut it down to 4 1/2 over and install the pins and bumper *for free*. I sent it in and received it back in about a week. Excellent customer service indeed. Installed it without drama and tested it this morning. I find that there is a bit more air on my shoulders, but it is completely off my chest and neck. Completely clean air at the helmet and (so far) no major buggage on the face shield. Exceptional customer service and a fine quality product. fubar |
Chadhargis
| Posted on Tuesday, June 27, 2006 - 04:14 pm: |
|
I'm running the Cee Bailey's 2.5 screen. It works well at all speeds below about 80mph. Above that, I get a bit of the old gorilla arms. O |
Fubar
| Posted on Tuesday, June 27, 2006 - 04:30 pm: |
|
Only "tested" to about 80. No sign of "GA" at that speed. More testing (for the benefit of the collective) later today... |
|