Author |
Message |
Wahmbush
| Posted on Monday, June 05, 2006 - 11:21 am: |
|
So, if you haven't seen my thread about painting my bike, I painted it flat black. I had a dark smoke double bubble on it before I cracked it and rashed my plastics. I am thinking about painting the stock windscreen the same flat black. Has anyone painted their windscreen? How did it come out? |
Coyote_xb12s
| Posted on Monday, June 05, 2006 - 10:15 pm: |
|
I painted mine flat black. Turned out good. |
Exitlandrew
| Posted on Friday, June 09, 2006 - 09:39 pm: |
|
You guys just use spray cans? Adhesion promoter? Im looking for brands, techniques, and so forth. |
Diablobrian
| Posted on Friday, June 09, 2006 - 10:17 pm: |
|
No_Rice did his in drab olive green too. I don't think he used any primer. It was probably the most photographed bike at homecoming. Green army bike with NOS. (kind of annoying when a $5 paint job steals the show, right Tim? ) |
Slider
| Posted on Sunday, June 11, 2006 - 10:37 pm: |
|
Rough up and clean thoroughly with RM 9000 wax remover / cleaner and scotch-bright pad spray with any adhesion promoter..2x heavy coats do not touch it with your hands before priming Use RM power filler primer with hardener and flex agent 4:1:1... wet sand with 400 grit then get the best Glassurit paint you can afford...paint it Clear coat with heavy flattening agent or gloss with hardened if you want any gloss. |
|