Author |
Message |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Cataract2
| Posted on Tuesday, July 26, 2005 - 01:26 pm: |
|
Well, I got a little tired of my rivets corroding along with the front bolts on the chin spoiler along with the bolt that holds the break line to the front motor mount. So... I replaced them with some zinc plated bolts (Couldn't find stainless in the sizes.) Here's some pictures of it.
The bolt sizes I used for the rivet replacements on the chin spoiler was #12-24 x 1/2" along with some washers for a #10 bolt. The front bolts on the chin spoiler and break line holding bracket was 1/4" x 1/2" with 5/16" lock washers. Total price in the end for all of this was $2.00. |
|