Author |
Message |
Eurotwins
| Posted on Thursday, March 17, 2005 - 11:24 am: |
|
I know this sounds lame but do those 3 firebolts stickers remove easily like with a hair dryer to soften them up? I don't want to scratch the plastics by scraping with a fingernail.....John |
Pcmodeler
| Posted on Thursday, March 17, 2005 - 11:33 am: |
|
Mine came right off. I didn't use a hair dryer and the temp wasn't very high either. |
Lpd22
| Posted on Thursday, March 17, 2005 - 11:56 am: |
|
same here. mine came off really easily. i had use a little goo gone. |
Buellman39
| Posted on Thursday, March 17, 2005 - 12:43 pm: |
|
Being that in most of the country it still fairly cool out I would warm them up with a hair dryer first. Then pull them off slowly to fast will leave sticker glue on the bike. |
Captainplanet
| Posted on Thursday, March 17, 2005 - 02:12 pm: |
|
Be aware that depending on how the bike has faded, you may be able to see where the sticker was after it is removed. |
Eurotwins
| Posted on Thursday, March 17, 2005 - 02:31 pm: |
|
There really should not be a fade issue as I just purchased it on 3/5 and the dealer had just recieved it 3/4. The production date is 2/05 serial #0055........John |
Captainplanet
| Posted on Thursday, March 17, 2005 - 03:09 pm: |
|
I agree, if the bike is that new, you shouldn't have a problem with fade. |
|